Hood Louver Wind tunnel simulation
#16
Addict
Rennlist Member
Rennlist Small
Business Sponsor
Rennlist Member
Rennlist Small
Business Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Yep – for louvers its the right place. If you want to make an intercooler specific vent you should put a taller lip in front of it to create a low pressure area where the vent opening is.
#17
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
No doubt that David's hood louvers are effective, however I am wondering what the overall best solution to modifying our hoods for improving heat extraction, and more specifically, improving heat exchanger efficiency is.
That said, I can't figure out if they are more effective than say, fellow Rennlister Duke's hood venting approach. Hopefully he wont mind me tossing up yet another pic he posted in another thread for reference.
![](http://www.revline.se/cars/RRXXX/2010/hoodvent.jpg)
My understanding is that our overall goal in modifying the hood of our cars is to improve the efficiency of the heat exchangers (IC/Radiator/AC on street cars) My 951 is a weekend/nice weather street car, but I am still very tempted to modify my hood because I am a firm believer that excessive heat is the root of most all mechanical failures to our engines. I don't want to risk frying the distributor or alternator if I were to be caught in a freak downpour with Duke's hood. I suppose I could have some "contingency cardboard" to slap on the hood and cover the vents if that were to happen.
Thanks for the good data David! I think your louvers are in a great spot according to that diagram.
Maybe the best solution is a combination of David and Duke's hoods...? Would probably end up being excessive for a street car. I gather that if I found a hot rod shop with sized stamps to do louvers like David's that it would be easier on the wallet, which is always a good thing.
That said, I can't figure out if they are more effective than say, fellow Rennlister Duke's hood venting approach. Hopefully he wont mind me tossing up yet another pic he posted in another thread for reference.
![](http://www.revline.se/cars/RRXXX/2010/hoodvent.jpg)
My understanding is that our overall goal in modifying the hood of our cars is to improve the efficiency of the heat exchangers (IC/Radiator/AC on street cars) My 951 is a weekend/nice weather street car, but I am still very tempted to modify my hood because I am a firm believer that excessive heat is the root of most all mechanical failures to our engines. I don't want to risk frying the distributor or alternator if I were to be caught in a freak downpour with Duke's hood. I suppose I could have some "contingency cardboard" to slap on the hood and cover the vents if that were to happen.
Thanks for the good data David! I think your louvers are in a great spot according to that diagram.
Maybe the best solution is a combination of David and Duke's hoods...? Would probably end up being excessive for a street car. I gather that if I found a hot rod shop with sized stamps to do louvers like David's that it would be easier on the wallet, which is always a good thing.
#19
Rainman
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
iirc the hot air out the back of the IC just dumps around the hood latch anyways so you could attach your duct to the top of the radiator mount and between the IC pipes.
#20
Addict
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Willard. That plot has been floating around the list a few years now don't remember who first posted it, but no I don't have a 944 version
#21
Addict
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I think Duke's vents will move much much more air than mine, simply by shear size and location.
#22
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
...and mostly likely pull more air from the specific area to do the most to enhance performance. Yours looks likely to pull more trapped unhood heat. Either way, it's got me thinking.
#24
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I just saw the hood vents on a Shelby Mustang GT500 that would be perfect for our hood. I'll try to post a photo in the next days. They seem to be the simplest way to do it.
#29
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
if you are putting a sunroof on your hood, might as well make it a power roof!
it would be nice to put some vents in my hood though. Wonder if there is a way to make the vents effective but have a drain pan on the bottom of the hood to catch water?
it would be nice to put some vents in my hood though. Wonder if there is a way to make the vents effective but have a drain pan on the bottom of the hood to catch water?
#30
Addict
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Nothing to cause any problems under the louvers (over the strut top area), I did keep and eye on the diagnostic port for any issues always dry.
Other hood vent location may be of concern ?