3 Liter Turbo Registry
#226
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hey now,
My motor is completed, its just not broken in, and tuned perfectly yet.
The shop doesnt want to give it to me until its broken in, just in case anything happens. Eh, the sacrifices we make to ensure, we "are in good hands" I guess.
edit: I guess tuning, and break in, could be considered necessary to completion.
My motor is completed, its just not broken in, and tuned perfectly yet.
![burnout](https://rennlist.com/forums/graemlins/burnout.gif)
edit: I guess tuning, and break in, could be considered necessary to completion.
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
#227
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I would like to register my 968....Here is a copy of a partial invoice/parts list:
PH 968 "TURBO S" ROTATING ASSEMBLY:
CUSTOM PREPARED CRANKSHAFT -- all oiling updates & modifications, street lightening, balancing
CUSTOM 968 TURBO S RODS -- with racing rod bolts, polished & balanced
CUSTOM MAHLE PISTONS -- with wrist pins & rings
REMANUFACTURED ENGINE BLOCK = HOT TANK DIP, ZYGLO CHECK (scan for material defects), SONNEN
HONE to 1st OVERSIZE (as needed), CLEAN
PH RACE PREPPED OIL PAN & PICKUP TUBE, with TURBO DRAIN PORTS
COMPLETE 968 ENGINE BEARING SET, with OIL PUMP DRIVE SLEEVE
COMPLETE 968 TURBO ENGINE GASKET SET (head set w/ wide fire ring head gasket; block set)
NEW 3.0L WATER PUMP, TURBO COOLANT TANK, ALL WATER HOSES
ALL BELTS & ROLLERS
PH CUSTOM BRAIDED OIL FEED LINE ASSEMBLIES TO/ FROM TURBOCHARGER, with
HIGH FLOW TURBO OIL SCAVENGE PUMP
PH CUSTOM TURBO HEADER & WASTEGATE PIPE
PH RACING DUAL-PORT WASTEGATE
PH CUSTOM STAINLESS STEEL 968 TURBO EXHAUST SYSTEM -- from turbo back
* SPORT MUFFLER w/ OEM-STYLE 4" BACK-CUT OVAL TIP (optional stock-looking tip)
* FREE-FLOW CATALYTIC CONVERTER TEST PIPE (optional free-flowing catalytic converter)
PH CUSTOM ALUMINUM INTERCOOLER, with aluminum boost tubing
REMANUFACTURE CYLINDER HEAD TO POWERHAUS SPECS -
PH 968 BOSCH-BASED ADJUSTABLE FUEL PRESSURE REGULATOR & GAUGE
SACHS SPORT CLUTCH PACKAGE -- pressure plate, disc, release bearing, hardware
PH 52#/HR BOSCH-STYLE INJECTORS -- with correct high impedence
PH CUSTOM 968 TURBO COMPUTER CHIP + K&N CONE FILTER INTAKE
PH FORGED RACING CONNECTING RODS -- average 4oz lighter each than factory rods
PH INTAKE MANIFOLD -- custom lightweight aluminum unit
CERAMIC COAT ENGINE COMPONENTS:
* 2500-degree thermal barrier coat headers, turbo pipes, turbine housing, down pipe;
intake manifold & boost pipes, piston crown & combustion chamber
* low friction coating on valve springs, piston skirts, camshafts
UPGRADE ENGINE COMPUTER CHIP & AIRFLOW METER
UPGRADED PH K29-SPEC TURBOCHARGER
UPGRADED WASTEGATE with ELECTRONIC BOOST CONTROLLER
ELECTRONIC BOOST GAUGE IN COCKPIT
EXTRUDE-HONE INTAKE MANIFOLD & BIG-BORE THROTTLE BODY
UPGRADED IGNITION SYSTEM -- multi-spark controller, coil, wires, plugs
PH BILLET 968 TURBO RS FLYWHEEL PACKAGE -- replaces heavy dual-mass flywheel with 1-piece unit,
PH 968 "TURBO S" BIG BRAKE PACKAGE, FRONT:
* 1 pr. OEM Front 968 Turbo S Rotors, Cross-drilled, 322mm
* 1 pr. OEM Porsche 993 Twin Turbo front calipers, RED
* 1 pr. PH front billet aluminum caliper adapters & hardware
* 1 set front Sport brake pads
* 1 set front brake pad wear sensors
* Brake bias valve
* DOT-legal braided stainless brake line set
PH 968 "993 TWIN TURBO" BIG BRAKE PACKAGE, REAR:
* 1 pr. OEM Rear 968 Turbo Rotors, Cross-drilled, 305mm
* 1 pr. OEM Porsche 993 Twin Turbo rear RED Calipers, machined for bolt-on installation
* 1 set rear Sport brake pads
* 1 set rear brake pad wear sensors
968 SPORT SUSPENSION:
* PH 944 GUN-DRILLED HOLLOW TORSION BARS
* 968 CS/TS (M030) 30mm HOLLOW FRONT ANTI-SWAY BAR
* ADJUSTABLE 22mm REAR ANTI-SWAY BAR
968 TURBO S" -STYLE ADJUSTABLE REAR WING968 TURBO S" -STYLE ADJUSTABLE REAR WING
PH 968 "TURBO S" ROTATING ASSEMBLY:
CUSTOM PREPARED CRANKSHAFT -- all oiling updates & modifications, street lightening, balancing
CUSTOM 968 TURBO S RODS -- with racing rod bolts, polished & balanced
CUSTOM MAHLE PISTONS -- with wrist pins & rings
REMANUFACTURED ENGINE BLOCK = HOT TANK DIP, ZYGLO CHECK (scan for material defects), SONNEN
HONE to 1st OVERSIZE (as needed), CLEAN
PH RACE PREPPED OIL PAN & PICKUP TUBE, with TURBO DRAIN PORTS
COMPLETE 968 ENGINE BEARING SET, with OIL PUMP DRIVE SLEEVE
COMPLETE 968 TURBO ENGINE GASKET SET (head set w/ wide fire ring head gasket; block set)
NEW 3.0L WATER PUMP, TURBO COOLANT TANK, ALL WATER HOSES
ALL BELTS & ROLLERS
PH CUSTOM BRAIDED OIL FEED LINE ASSEMBLIES TO/ FROM TURBOCHARGER, with
HIGH FLOW TURBO OIL SCAVENGE PUMP
PH CUSTOM TURBO HEADER & WASTEGATE PIPE
PH RACING DUAL-PORT WASTEGATE
PH CUSTOM STAINLESS STEEL 968 TURBO EXHAUST SYSTEM -- from turbo back
* SPORT MUFFLER w/ OEM-STYLE 4" BACK-CUT OVAL TIP (optional stock-looking tip)
* FREE-FLOW CATALYTIC CONVERTER TEST PIPE (optional free-flowing catalytic converter)
PH CUSTOM ALUMINUM INTERCOOLER, with aluminum boost tubing
REMANUFACTURE CYLINDER HEAD TO POWERHAUS SPECS -
PH 968 BOSCH-BASED ADJUSTABLE FUEL PRESSURE REGULATOR & GAUGE
SACHS SPORT CLUTCH PACKAGE -- pressure plate, disc, release bearing, hardware
PH 52#/HR BOSCH-STYLE INJECTORS -- with correct high impedence
PH CUSTOM 968 TURBO COMPUTER CHIP + K&N CONE FILTER INTAKE
PH FORGED RACING CONNECTING RODS -- average 4oz lighter each than factory rods
PH INTAKE MANIFOLD -- custom lightweight aluminum unit
CERAMIC COAT ENGINE COMPONENTS:
* 2500-degree thermal barrier coat headers, turbo pipes, turbine housing, down pipe;
intake manifold & boost pipes, piston crown & combustion chamber
* low friction coating on valve springs, piston skirts, camshafts
UPGRADE ENGINE COMPUTER CHIP & AIRFLOW METER
UPGRADED PH K29-SPEC TURBOCHARGER
UPGRADED WASTEGATE with ELECTRONIC BOOST CONTROLLER
ELECTRONIC BOOST GAUGE IN COCKPIT
EXTRUDE-HONE INTAKE MANIFOLD & BIG-BORE THROTTLE BODY
UPGRADED IGNITION SYSTEM -- multi-spark controller, coil, wires, plugs
PH BILLET 968 TURBO RS FLYWHEEL PACKAGE -- replaces heavy dual-mass flywheel with 1-piece unit,
PH 968 "TURBO S" BIG BRAKE PACKAGE, FRONT:
* 1 pr. OEM Front 968 Turbo S Rotors, Cross-drilled, 322mm
* 1 pr. OEM Porsche 993 Twin Turbo front calipers, RED
* 1 pr. PH front billet aluminum caliper adapters & hardware
* 1 set front Sport brake pads
* 1 set front brake pad wear sensors
* Brake bias valve
* DOT-legal braided stainless brake line set
PH 968 "993 TWIN TURBO" BIG BRAKE PACKAGE, REAR:
* 1 pr. OEM Rear 968 Turbo Rotors, Cross-drilled, 305mm
* 1 pr. OEM Porsche 993 Twin Turbo rear RED Calipers, machined for bolt-on installation
* 1 set rear Sport brake pads
* 1 set rear brake pad wear sensors
968 SPORT SUSPENSION:
* PH 944 GUN-DRILLED HOLLOW TORSION BARS
* 968 CS/TS (M030) 30mm HOLLOW FRONT ANTI-SWAY BAR
* ADJUSTABLE 22mm REAR ANTI-SWAY BAR
968 TURBO S" -STYLE ADJUSTABLE REAR WING968 TURBO S" -STYLE ADJUSTABLE REAR WING
#228
Three Wheelin'
Join Date: Sep 2004
Location: Tennesee
Posts: 1,269
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
This is my in process 3.0L . I have no set completion date.
Bore: 104.5 Alusil
stroke: 88mm
Pistons: Mahle/Andial 104.5mm turbo pistons
Rods: Arrow custom
Block: S2
Head: 2.7L n/a
Engine management: TEC GT
Turbo: something special.
Bore: 104.5 Alusil
stroke: 88mm
Pistons: Mahle/Andial 104.5mm turbo pistons
Rods: Arrow custom
Block: S2
Head: 2.7L n/a
Engine management: TEC GT
Turbo: something special.
#229
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Sounds like a great car. Can we boil it down to a single line like the other entries? I can't tell from this list, but would guess it is Alusil 104/88, 3.0 liters, 16v head, k29, Motronic PH chips, 968cam?
#230
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Miles:
Do you happen to have more photos of your car? It looks beautiful and I think a lot of people would love to see more of it!
![thumbup](https://rennlist.com/forums/graemlins/thumbup.gif)
#231
Rennlist Member
Join Date: Jan 2008
Location: Brooklyn, NY
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I'm in progress right now, waiting for my S2 short block to come from az. Now I am assuming i should leave the Harmonic on it? I am also talking with Scott Gomes about boring to 104.5 for Mahle pistons. All together I am 3 engines now lol. 2 2.5 turbos and 1 3.0...
![thumbup](https://rennlist.com/forums/graemlins/thumbup.gif)
#232
Pro
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hi Guys,
Haven't posted on here in a long while but thought I'd post up my car's spec if a 2.8 is allowed join the party
...................1989 944 Turbo with M030 option. Alpine white with Ivory Leather. Features 2.8 litre long stroke engine using 3.0 litre crankshaft. Performance 0-60 in 4.5 seconds and over 180mph top speed. 422bhp (at 1.2 bar verified by ABG Motorsport on 09/02/2004) , 400+lbft torque (at the flywheel).
- 2.8 Litre Stroker Engine with Carillo Rods & Mahle pistons
- Dual Port Wastegate and Manual Boost Controller
- Kokeln Air Intake Kit (using stock AFM)
- Adjustable Fuel Pressure Regulator
- K&N FilterCharge Air Cleaner
- Kokeln Club Turbo 61#/T350
- 55#/hr Siemens Injectors
- Custom MAP Sensor
- 993 Bi-Turbo Big Red Brakes & 12.5" 928GTS Disks
- 17" Mille Miglia Cup Wheels
- SPA 94 Digital Boost and Oil Temperature Gauge
- Internal Adjustable Boost Control (via MBC)
- 968 Club Sport Steering Wheel
- 965 Turbo 2 Brake Pads
- Stage 2 Intercooler
- Custom SS Inlet to Turbo
Regards
John Daly.
Haven't posted on here in a long while but thought I'd post up my car's spec if a 2.8 is allowed join the party
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
- 2.8 Litre Stroker Engine with Carillo Rods & Mahle pistons
- Dual Port Wastegate and Manual Boost Controller
- Kokeln Air Intake Kit (using stock AFM)
- Adjustable Fuel Pressure Regulator
- K&N FilterCharge Air Cleaner
- Kokeln Club Turbo 61#/T350
- 55#/hr Siemens Injectors
- Custom MAP Sensor
- 993 Bi-Turbo Big Red Brakes & 12.5" 928GTS Disks
- 17" Mille Miglia Cup Wheels
- SPA 94 Digital Boost and Oil Temperature Gauge
- Internal Adjustable Boost Control (via MBC)
- 968 Club Sport Steering Wheel
- 965 Turbo 2 Brake Pads
- Stage 2 Intercooler
- Custom SS Inlet to Turbo
Regards
John Daly.
#233
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
So, my big motored friends, I'm mulling over intercooler options and don't see much mention in this thread of intercoolers. What are you all running?
#234
Drifting
#236
Pro
#239
Pro
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Yes, as Olli stated...its a euro bumper but I removed the black rubber strip and filled the holes. If the car was any other colour but white I wouldn't have bothered doing it but the black strip stood out far too much for my liking against the white. I will post a pic of the engine bay when I get the chance...
#240
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Join Date: May 2001
Location: Hotlanta - NE of the Perimeter
Posts: 12,269
Received 266 Likes
on
153 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Just noticed this thread...
Trevor's old 968 T is being rebuilt currently as we speak. Block goes out Friday for work...looking for a Spring date to drive.![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
92' 968 Block
Bored over to 104.5mm
Andial Mahle Pistons
Stock Stroke
89' 2.7 8V head
Target assembly completion - May '09
Trevor's old 968 T is being rebuilt currently as we speak. Block goes out Friday for work...looking for a Spring date to drive.
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
92' 968 Block
Bored over to 104.5mm
Andial Mahle Pistons
Stock Stroke
89' 2.7 8V head
Target assembly completion - May '09
Last edited by Jay Wellwood; 02-28-2009 at 11:59 PM. Reason: 'cause Rolex NJ said to. :)