aftermarket/Euro Throttle body for 16V
#31
Rennlist Member
check out:
www.928trackcars.com/kibort
scan down there is an air box pic.
MK
www.928trackcars.com/kibort
scan down there is an air box pic.
MK
Originally posted by Weissach1982
Mark, do you have link to the pictures or a website I can look at the airbox?
Thanks porken, I'll keep that open airbox mod up for ideas, but I think i might drill holes, but if that doesn't work i'll get back to you. Plus the reason i'm using bungie cords is that i don't have any more rubber straps that went on there before and the filter will never ever come off lol.
Thanks,
Cory J.
82 Weissach
Mark, do you have link to the pictures or a website I can look at the airbox?
Thanks porken, I'll keep that open airbox mod up for ideas, but I think i might drill holes, but if that doesn't work i'll get back to you. Plus the reason i'm using bungie cords is that i don't have any more rubber straps that went on there before and the filter will never ever come off lol.
Thanks,
Cory J.
82 Weissach
#32
Rennlist Member
I would aways use the cover. there is a big difference in the temps of the air. the intake tubes, with a couple of more vents (more than the 928trackcars.com/kibort ) pics still draws big pieces of rubber off the front of the car, meaning the force of the air is still quite big, to be pulling large pieces of rubber and rocks from the front of the car, up over the radiator, through the tubes, and stuck in the air filter. whatever air took that debrie up , it would be very cool compared to a filter with no cover. all that air mass that took the debris up, would not be used by the engine without the cover attached . even vented, its amazing that there is that much Vacuum. I have as much area vented to the rear of the air box as I do with the 2 stock sized tubes going to the radiator openings.
something to consider.
MK
something to consider.
MK
#33
Instructor
Thread Starter
Join Date: Dec 2002
Location: Pensacola,Florida
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
Mark, the only airbox pic i saw was the one of with the "eRam'' on top of it..I saw the big tube going out the back of the airbox, is that it?
Also, if i drilled holes into the airbox cover and left that on and the tubes..would that create more vacuum so that the air over the hood inlet would be sucked in more?
Thanks,
Cory J,
82 Weissach
Also, if i drilled holes into the airbox cover and left that on and the tubes..would that create more vacuum so that the air over the hood inlet would be sucked in more?
Thanks,
Cory J,
82 Weissach
#34
Instructor
Thread Starter
Join Date: Dec 2002
Location: Pensacola,Florida
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
Mark, the only airbox pic i saw was the one of with the "eRam'' on top of it..I saw the big tube going out the back of the airbox, is that it?
Also, if i drilled holes into the airbox cover and left that on and the tubes..would that create more vacuum so that the air over the hood inlet would be sucked in more?
Thanks,
Cory J,
82 Weissach
Also, if i drilled holes into the airbox cover and left that on and the tubes..would that create more vacuum so that the air over the hood inlet would be sucked in more?
Thanks,
Cory J,
82 Weissach
#36
Banned
Join Date: Feb 2002
Location: Ft. Lauderdale FLORIDA
Posts: 5,248
Likes: 0
Received 4 Likes
on
3 Posts
Here's a picture of an ROW MAF sensor. This is the same size diameter as the elbow and the throttle plate on a "Euro" car. This is an '85 S2, which is a 2 valve car with the same LH-jetronic as a latter car.
N!
N!
#42
Rennlist Member
Hi toofast,
Sorry the set of Euro runners I had were sold to the first person who replied to my post. ..............I could probably source so more.........interested ?
Sorry the set of Euro runners I had were sold to the first person who replied to my post. ..............I could probably source so more.........interested ?
#45
Rennlist Member
Weissach
Is your '82 L jet equipped ?
toofast,
I will have to check what is available, and what the prices are. I have links to people who migth be able to help.
I will make some enquiries in the coming week and let you know.
Is your '82 L jet equipped ?
toofast,
I will have to check what is available, and what the prices are. I have links to people who migth be able to help.
I will make some enquiries in the coming week and let you know.