So what did you do to your 928 Today......
04-12-2014, 09:35 PM
#4652
Burning Brakes
Mine is still up on your lift-bars.
04-13-2014, 01:43 AM
#4654
In prep for a three to seven day breakdown, clean, repair/replace of things I can do under hood (intake refresh, cam cover cleaning, engine compartment cleaning; replacing: vacuum tubing, spark plug wires, fuel hoses, heater/cooling hoses, intake couplers, AFC o-ring & mounts) and FINALLY finishing my green wire install, I have finally brought my engine TDC w/newly arrived 27mm socket and 16" flex 1/2"drive ratchet. (It moved so easily!)
I also successfully scared a couple stubborn screws with a newly acquired manual impact driver. Unfortunately, nothing in my arsenal has had any impact whatsoever on some stubborn Allen bolts for my DS door (to install shims from Jerry) or one stubborn Allen bolt (so far) in trying to remove pod & dash for refresh and to install (temporary) dash cap. Time to get bolt removers and a few new bolts, I think!
I also successfully scared a couple stubborn screws with a newly acquired manual impact driver. Unfortunately, nothing in my arsenal has had any impact whatsoever on some stubborn Allen bolts for my DS door (to install shims from Jerry) or one stubborn Allen bolt (so far) in trying to remove pod & dash for refresh and to install (temporary) dash cap. Time to get bolt removers and a few new bolts, I think!
04-13-2014, 01:58 AM
#4655
Intermediate
Join Date: Dec 2009
Location: Lafayette Indiana
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
1984 928S
Started for first time this season. Fuel leaking all over. Found fuel injector tube squirting under hood. Spent morning replacing fuel lines between fuel rail and injectors.; which led to cleaning and polishing.
04-13-2014, 08:56 AM
#4656
Rennlist Member
This past winter GTS projects included:
motor mount R&R
OPG
new ignition components; wires, coils, disits, rotors, CPS, spark plugs
fuel pump, filter, S pipe/washers, cable quadrant to tbody
new Carrera wheels with Bridgestone rubber
regular engine and trans oil change
short throw shifter
I think the car is ready......... for now
motor mount R&R
OPG
new ignition components; wires, coils, disits, rotors, CPS, spark plugs
fuel pump, filter, S pipe/washers, cable quadrant to tbody
new Carrera wheels with Bridgestone rubber
regular engine and trans oil change
short throw shifter
I think the car is ready......... for now
04-13-2014, 02:52 PM
#4657
Race Car
^^Oil change and parking lot winter 16" FLATS --> summer 18" cup IVs....
Basked in remorse and regret, witnessing the mayhem that the car's first winter operation wrought..
Have CV on the list...procrastinating on whether to slack off and get the rebuilt or do the whole deed.
Edit: Couple hrs later and now they're forecasting possible flurries/sleet....kidding me.
BTW Ad0911, that is just a very cool pic. Initially I was startled that you were holding a sledge hammer, then I realized I was sublimating...
Basked in remorse and regret, witnessing the mayhem that the car's first winter operation wrought..
Have CV on the list...procrastinating on whether to slack off and get the rebuilt or do the whole deed.
Edit: Couple hrs later and now they're forecasting possible flurries/sleet....kidding me.
BTW Ad0911, that is just a very cool pic. Initially I was startled that you were holding a sledge hammer, then I realized I was sublimating...
Last edited by SMTCapeCod; 04-13-2014 at 06:25 PM.
04-13-2014, 05:34 PM
#4659
Racer
Join Date: Sep 2012
Location: Las Vegas, Nv
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
04-13-2014, 06:58 PM
#4661
Rennlist Member
Join Date: Apr 2010
Location: Kennedale,TX a suburb of DFW
Posts: 1,045
Likes: 0
Received 3 Likes
on
3 Posts
Entered my 87 928 S4 in the Boardwalk Spring Concorso with Jack Griffin. He drove his 89 Speedster. Beautiful day on the lawn of the Dallas Ferrari dealership. No trophies but lots of attention as I was the only 928 in a field of 300.
04-13-2014, 09:26 PM
#4662
Race Car
