So what did you do to your 928 Today......
07-06-2013, 08:48 PM
#4007
Drifting
Returned from Avalon NJ (Shore) to find on my door step my new Binks HVLP spray gun, paint, primer and Navy blue Leather hides from Italy.
Balsa wood for laminating to get a ducktail spoiler shape correct for my RS creation.
Organizing..
Balsa wood for laminating to get a ducktail spoiler shape correct for my RS creation.
Organizing..
07-06-2013, 08:54 PM
#4008
Intermediate
Did a bunch of work adjusting the throttle and trans cable, spark plugs and switching my rear seat belts. The PO had them installed incorrectly and the would not pull out...lol. Never knew they had to be side specific.
Oh and I took some pictures...
Oh and I took some pictures...
07-06-2013, 09:01 PM
#4009
Racer
Join Date: Apr 2011
Location: Australia
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Have you rolled out the rear wheel arches (fenders) or is that an optical illusion - pic # 2.
Hey I really like your wheels. Which brand? How big? (look like at least 18's)? What offsets?
Great looking 928
Cheers
07-07-2013, 12:05 AM
#4011
Intermediate
The wheels are 18" and made by Voxx. Not sure of offset..sorry.
I can find out though..
Thanks
07-07-2013, 12:30 AM
#4012
Drifting
07-07-2013, 01:33 AM
#4013
Rennlist Member
Flogged it around Highway 23 and the Mulholland Highway and then Kanan for some tunnel blasting to mess with my dad
(he was in the passenger's seat).
(he was in the passenger's seat).
07-07-2013, 04:28 AM
#4014
Nordschleife Master
Late night edition.
Working with son on his off road bicycle which had issues -> fixed.
While we were up I opted to change out the Temp II Sensor connector. The wiring there was hacked by PO and I wasn't comfortable with the connector. I was left with intermittent cold idle issue that could be altered by 'jiggling' the connector. It was interesting to note that the wiring was reversed in pin 1 & 2 (Green vs Green/Red). I put right in the new connector, but on review of WD it shouldn't have made a difference. Will start up tomorrow. Very deliberate and clean job done here.
Working with son on his off road bicycle which had issues -> fixed.
While we were up I opted to change out the Temp II Sensor connector. The wiring there was hacked by PO and I wasn't comfortable with the connector. I was left with intermittent cold idle issue that could be altered by 'jiggling' the connector. It was interesting to note that the wiring was reversed in pin 1 & 2 (Green vs Green/Red). I put right in the new connector, but on review of WD it shouldn't have made a difference. Will start up tomorrow. Very deliberate and clean job done here.
07-07-2013, 05:02 AM
#4018
Racer
Join Date: Apr 2011
Location: Australia
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
07-07-2013, 11:05 AM
#4019
Rennlist Member
Major makeover
replaced all four original shocks with 4 new Boges from Roger. Motor mounts going in on Tuesday. Saturday will commence the TB/WP, fuel lines, power steering lines, porken tensioner, and h/o alternator.
Will take and post pics and ask for advice when needed.
Trans lines and Constatine's super clamp/bearings already completed after purchase by PO.
Will take and post pics and ask for advice when needed.
Trans lines and Constatine's super clamp/bearings already completed after purchase by PO.
