New Product: *** Illuminated Sill Kit *** UPDATE: NOW SHIPPING ***
03-25-2011, 09:05 AM
#122
Three Wheelin'
03-25-2011, 09:16 AM
#123
Rennlist Member
Really not that difficult to mask, there is a slight gap around the numbers, lay wide piece of masking taped right over numbers and use xacto knife to cut out numbers and a little patience.
03-25-2011, 01:44 PM
#126
Rennlist Member
Jim, I used Testor's 1605 Candy Apple Red.
If anyone is using the red illumination kit and hasn't installed it yet, I highly recommend painting the letters from the underside. I didn't feel like removing the sills and removing the illumination kit and starting over.
Results are still impressive.
If anyone is using the red illumination kit and hasn't installed it yet, I highly recommend painting the letters from the underside. I didn't feel like removing the sills and removing the illumination kit and starting over.
Results are still impressive.
03-25-2011, 01:51 PM
#127
Supercharged
Rennlist Member
Rennlist Member
Join Date: May 2002
Location: Back in Michigan - Full time!
Posts: 18,925
Likes: 0
Received 60 Likes
on
34 Posts
https://rennlist.com/forums/2781071-post25.html
https://rennlist.com/forums/3645203-post7.html
03-25-2011, 02:14 PM
#128
Three Wheelin'
Watch out... this is a path to the dark side...
https://rennlist.com/forums/2781071-post25.html
https://rennlist.com/forums/3645203-post7.html
https://rennlist.com/forums/2781071-post25.html
https://rennlist.com/forums/3645203-post7.html
03-25-2011, 02:19 PM
#130
Nordschleife Master
As a BIG Star Wars fan I can really relate to that "path to the dark side" comment AO! You are quite correct, this could go sideways in a REAL HURRY!!! 
I'll try and control myself!
I'll try and control myself!
04-03-2011, 09:13 PM
#131
Three Wheelin'
Driver's side sill installed. I feel like a kid again. It looks just marvelous with two different colours. Funky. I think I will keep it this way for a while.
Great job Paul & Hans.
Questions: I installed mine using the switched ground wire from the interior lights so it comes on whenever either door or hatch is opened. Problem with this method is that it cannot be turned off so any maintenance requiring any of these doors to be opened for a long period could affect the battery .
What methods did you folks use?
Thanks
Great job Paul & Hans.
Questions: I installed mine using the switched ground wire from the interior lights so it comes on whenever either door or hatch is opened. Problem with this method is that it cannot be turned off so any maintenance requiring any of these doors to be opened for a long period could affect the battery .
What methods did you folks use?
Thanks
04-03-2011, 11:03 PM
#134
Former Vendor
Thread Starter
Driver's side sill installed. I feel like a kid again. It looks just marvelous with two different colours. Funky. I think I will keep it this way for a while.
Attachment 525350
Great job Paul & Hans.
Questions: I installed mine using the switched ground wire from the interior lights so it comes on whenever either door or hatch is opened. Problem with this method is that it cannot be turned off so any maintenance requiring any of these doors to be opened for a long period could affect the battery .
What methods did you folks use?
Thanks
Attachment 525350
Great job Paul & Hans.
Questions: I installed mine using the switched ground wire from the interior lights so it comes on whenever either door or hatch is opened. Problem with this method is that it cannot be turned off so any maintenance requiring any of these doors to be opened for a long period could affect the battery .
What methods did you folks use?
Thanks
Paul