Rick Carter

I called my local Discount store directly to make sure I could get a set.

Rod Underwood

Will these fit front AND back on the 87 or 90??

Thanks
Rod

hacker-pschorr

Here you go:
https://rennlist.com/forums/928-forum/402224-996-wheels-four-10-x-18-et-65-a.html

Dan87951

Free shipping to Michigan as well. My local discount store was saying there might be shipping charges so I just went ahead and bought them direct.

Facts on tire size:
A 265/35/18 will fit on the rear of these rims and will NOT rub with a S4!

Still trying to figure out what front size to run however. Might just end up getting the 18x8.5 cheap off ebay and getting the 235/40/18's like tire rack recommends.

FlyingDog

I ordered 4. It was tempting to order a set of RT-615s to go with them...

BTW, They're only $50.04 plus free shipping for me.

Rod Underwood

You have a PM
Rod

Sab

I ordered 4 but it showed low stock and gave me no shipping option. It asked for an apointment...

AO

It depends on the tire, but yes, they will fit in the rear without issue with upto a 275 tire. Fronts might need to run with a 255.

See calculator in my sig...

FlyingDog

Andrew, your calculator says 275 is 2.something mm too wide for the front. With a camber change, that should not be a problem depending on how wide the tire is relative to standard sizing.

It says 275 will fit in the rear with stock 21mm S spacer.

Now I just need to find some big MPSCs or R6s...

Mike Simard

That link from the first post might show stores local to Dan in Michigan. To place an internet order use "discounttiredirect,com"

Good luck, it sounds like we all piled on

FlyingDog

When you order, be sure to put Rennlist.com in the referal. Maybe they'll realize we have some buying power and send some more deals our way.

hacker-pschorr

It's not going to be exact. I've seen up to 1.5" difference in width between different brand tires of the same size. The 265-40-18's I have on my car now are over 12" wide due to the very large rim protector.

AO

I'll admit the front tire portion of my calculator is not very accurate. And just becasue it sticks out by 2mm, that doesn't mean it will rub. ANyway, if you get some better data points for me, please let me know and I'll adjust it as needed.

BTW, did you notice the update?

FlyingDog

I never used it before the update.

123quattro

I bought two out of the AZ warehouse. $100 to my door. They have two left and that's it.