admiralkhole

Did this yesterday, but...

I wanted to see how my twists would look painted black.

TexasRider

Put the new cassette hinge from Porcshe on. You have to love Porsche parts - hey fit like they made to go on there. One thing I had forgotten is that there is a itty bitty light bulb under there for the ash tray etc. Interesting.

Reimu

I fixed a small vacuum leak and was rewarded with my afrs going nuts

sumguy

Bought it!

TexasRider

^^^

And now the fun and work begins. Welcome to RL.

Aussie944S

Well installed MSD Blaster coil, hood struts, trim piece, and replaced the POS FAE OPS with a VDO hardest part was getting the FAE part out the nut was 24.3mm so my 24mm spanner would not fit it and a 25mm was to big.

Not sure if its just voodo magic but the new coil seems to make the car run a lot better and feels/sounds like it is smooth.

XrussianX

Took apart the center counsel to replace the broken/poorly modified pieces. The trim around the radio was ripped off, the ash tray was none existent, the armrest was repositioned to cover the gap of the ash tray. And cleaned the hell out of that area "while I was there"

Yummybud924

installed my bilstein shocks and struts now I need an alignment. This weekend I'm replacing the belts and water pump.

Chunkerz

I installed my cup holders from only944.com


Finally got around to soldering my front turn signals/fog lights


And spent 3 hours cleaning up the silicone I squirted into the gap where the hatch glass separated from the frame. It's definitely not my proudest work, but if it stops the leak then oh well. I really wish I had used black silicone This stuff was supposed to be clear...



If it passes the leak test tomorrow it will officially christened as my DD.

quicks

Looked at my 924 while I talked to the tire guy on the phone about how he was actually going to get me my Falken azenis rt615k tires (they had no way to get yesterday before I spent 5 minutes yelling at the boss) to replace the entry level touring tires they tried to pass of as performance tires.

CyCloNe!

Got new gauge rings installed, looks good and cleaned as much of that mold dotting stuff I could off with some bleach.

NascarRacn

I finally got around to installing the passenger seat in my 88 944 Spec 2! Cool Shirt system tomorrow....I hope

CyCloNe!

installed Audi Heater Valve

Douglas Sorrells

Finally stepped up to some 18" whees & tires for the 951. They make it handle worlds better.

morghen

looks great !