RED87944S

i was just about sure you were wrong..but i think your right since they only sell the top one..interesting

RED87944S

so lets say i have a bad DME relay would that cause there to be no spark?

RED87944S

i just ordered a new dme relay for $20

Kburke

It still looks awesome.... So do these I think it is just about the same size.

Even Better

How did you hook up the horn?

Smaller is better since hitting of the thigh is an issue for people who use the track.

Kburke

If your turn signal does not work then here you go.

https://rennlist.com/forums/924-931-...eft-turns.html

joonas

http://www.clarks-garage.com/shop-manual/ign-02.htm

There is only one reference sensor. Other one on your picture is not used.
At Clark's site you see that sensor also. 944S does not have speed sensor.

joonas

Some pictures that I took when I replaced my 944S reference sensor holder
http://joonas.pri.ee/gallery/thumbnails-9-page-2.html

RED87944S

i thought the lower one was the speed sensor..i guess thats good if i dont have both of them..

joonas

944S has only reference sensor, that is a fact.

marcusw03

Hope the relay works for you. I picked up my first 944 NA that had a bad relay and paid 500 for the entire car because it wouldn't start. I popped in a new DME relay and boom fired right up.

RED87944S

i dont know what i am going to do if the relay dont work...

dose anyone have a DME i can test the car with?

and the last thing i can do is replace the sensor..

if that dont work what the hell am gonna do...problem after problem..

joonas

1. When you crank the engine does the tachometer needle jump?
2. How did you check the spark?

jstand22

Did you check the sensor behind the cam gear housing...hall sensor I think it is? If that's broken you'll get no spark.

RED87944S

it connects fine,but some plastic around it fell apart,but it still connects..

RED87944S

no it dose not last time i checked...i ground the thread of spark plug and crank the motor..