PIWIS 3 Coding Retrofit and Feature Request
#46
Burning Brakes
If you find anything re: disabling the automatic hill hold assist….. please share!
The following users liked this post:
enduro (07-06-2022)
#47
Rennlist Member
Thread Starter
The following users liked this post:
daaa nope (06-14-2022)
#48
Rennlist Member
Thread Starter
Ok I think that this is the setting to turn off Hill Assist. I forgot that I had my DSC Sport controller installed. When I scanned with PIWIS, it could not code it with Automatic Coding. I need someone to test it lol. It's in the PSM module
The following users liked this post:
The Leucardian (05-20-2024)
#49
Rennlist Member
Just wanted to say this thread is awesome and thanks to the guys who are doing all the research and experimentation and sharing the results with the community. Very excited to hear that theres a way to get the Track precision app working without the navi option. Now to get a PIWIS or find someone who has one locally...
The following users liked this post:
718socal (06-18-2022)
#50
Rennlist Member
Thread Starter
Just wanted to say this thread is awesome and thanks to the guys who are doing all the research and experimentation and sharing the results with the community. Very excited to hear that theres a way to get the Track precision app working without the navi option. Now to get a PIWIS or find someone who has one locally...
#51
Burning Brakes
Just wanted to say this thread is awesome and thanks to the guys who are doing all the research and experimentation and sharing the results with the community. Very excited to hear that theres a way to get the Track precision app working without the navi option. Now to get a PIWIS or find someone who has one locally...
The following users liked this post:
718socal (06-18-2022)
#52
Rennlist Member
Thread Starter
This was requested. Number of Turn signal Blink. You can change the number here.
The following users liked this post:
CaptainSlowly (10-18-2023)
#53
Pro
Regarding that, I insisted to my dealer it was programmable and they insisted right back it wasn't. I had about become convinced they were right, thanks for confirming my position. I'd love to have the five blink feature as well, plus nav with cluster readout, hoping Sima can do all this.
#54
I bought a bi directional coder scanner X431. It allows a number coding features in an easy interface.
So far I coded:
Turn signals 3 to 7
Disabled headlamp washers
Tach and speedo cluster lights always on
Rear DRLs alway on
Seatbelt warning off
So far I coded:
Turn signals 3 to 7
Disabled headlamp washers
Tach and speedo cluster lights always on
Rear DRLs alway on
Seatbelt warning off
#55
Burning Brakes
Ok to reiterate - this thread is awesome. Thanks for all the screenshots @718socal !
I can also confirm that the settings to disable Hill Hold Assist work (since I was the one that asked for it!)
I wonder if there's a way to have the "mirror tilt when in reverse" tilt more? I got that working too (wasn't sure if it would since my car doesn't have the memory function). But it barely tilts downward.... not enough to at least check for how close to the curb I am when parallel parking...
I can also confirm that the settings to disable Hill Hold Assist work (since I was the one that asked for it!)
I wonder if there's a way to have the "mirror tilt when in reverse" tilt more? I got that working too (wasn't sure if it would since my car doesn't have the memory function). But it barely tilts downward.... not enough to at least check for how close to the curb I am when parallel parking...
The following 3 users liked this post by daaa nope:
#56
Rennlist Member
Thread Starter
Ok to reiterate - this thread is awesome. Thanks for all the screenshots @718socal !
I can also confirm that the settings to disable Hill Hold Assist work (since I was the one that asked for it!)
I wonder if there's a way to have the "mirror tilt when in reverse" tilt more? I got that working too (wasn't sure if it would since my car doesn't have the memory function). But it barely tilts downward.... not enough to at least check for how close to the curb I am when parallel parking...
I can also confirm that the settings to disable Hill Hold Assist work (since I was the one that asked for it!)
I wonder if there's a way to have the "mirror tilt when in reverse" tilt more? I got that working too (wasn't sure if it would since my car doesn't have the memory function). But it barely tilts downward.... not enough to at least check for how close to the curb I am when parallel parking...
The following users liked this post:
Larry Cable (01-29-2023)
#57
Track Day
Join Date: Nov 2007
Location: Maidenhead, Berkshire, UK
Posts: 15
Likes: 0
Received 17 Likes
on
6 Posts
I doubt you can do much about the mirror tilt. The mirrors that come with the memory pack have encoders in the motors to read the position accurately. I suspect that when you code the tilt on non-memory mirrors it starts to move, realises it can't read the position, and stops.
#58
Rennlist Member
Thread Starter
I doubt you can do much about the mirror tilt. The mirrors that come with the memory pack have encoders in the motors to read the position accurately. I suspect that when you code the tilt on non-memory mirrors it starts to move, realises it can't read the position, and stops.
#59
Burning Brakes
My Cayenne has mirror tilt and it works great.
I have never paid attention to how well it works (or doesn't work) on another 718, to know if this is the normal tilt, or a result of the hack.
I have never paid attention to how well it works (or doesn't work) on another 718, to know if this is the normal tilt, or a result of the hack.
#60
Instructor
I've done the last mode setting so that the car remembers my Auto Start Stop selection. Pasted from how to on Planet9 https://www.planet-9.com/threads/piw...t-mode.238169/
Last edited by arne; 07-06-2022 at 11:32 PM.