Dundon "Making the 718 GT4 Faster"
The following users liked this post:
Jamie@dundonmotorsports (11-01-2020)
#47
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Dundon 718 GT4 Street Header Exhaust: 30whp gains SAE adjusted, intake air temps within 5-6degrees of each other on the runs
718 GT4 with Dundon Street Exhaust compared to a stock 991.1 GT3
718 GT4 with Dundon Street Exhaust compared to a stock 991.1 GT3RS
718 GT4 with Dundon Street Exhaust compared to a stock 981 GT4
991.2 GT3RS with Dundon D3 kit compared to a 718GT4 with Street Headers. (The king is still the king, at least for a little while)
__________________
Dundon Motorsports
Gig Harbor, WA
253-200-4454
jamie@dundonmotorsports.com
www.dundonmotorsports.com
Facebook.com/dundonmotorsports
Instagram @dundon_motorsports
Dundon Motorsports
Gig Harbor, WA
253-200-4454
jamie@dundonmotorsports.com
www.dundonmotorsports.com
Facebook.com/dundonmotorsports
Instagram @dundon_motorsports
#48
Rennlist Member
Is the gt4 in 3rd gear for these pulls?
#49
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
doesnt matter on a dynapack. Gear ratios are all known and we control the ramp rate (rpm increase/time) in the software. Remember this isn’t an inertia based dyno like a dynojet. The dynapack is pushing back and limiting the cars progress through the Rpms.
The following 2 users liked this post by Jamie@dundonmotorsports:
porscheflat6 (10-31-2020),
Rennolazine (10-31-2020)
#50
Rennlist Member
doesnt matter on a dynapack. Gear ratios are all known and we control the ramp rate (rpm increase/time) in the software. Remember this isn’t an inertia based dyno like a dynojet. The dynapack is pushing back and limiting the cars progress through the Rpms.
The following users liked this post:
Jamie@dundonmotorsports (11-01-2020)
#51
The following users liked this post:
Jamie@dundonmotorsports (11-01-2020)
#52
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
no sir, there’s more on the table with the car tuned, We’re working with m-engineering on the tune... hopefully this coming week we can get that knocked out.
The following users liked this post:
porscheflat6 (10-31-2020)
The following users liked this post:
Jamie@dundonmotorsports (11-01-2020)
#54
Rennlist Member
Headers, tune and PDK should make for a great car. My dealer said he could get a GT4/PDK for me. Just depends on how big a bath I want to take on the .2 GT3 which I've really grown to like with the Dundon headers.
Last edited by Alan C.; 11-01-2020 at 01:02 AM.
The following users liked this post:
Jamie@dundonmotorsports (11-01-2020)
#56
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Our complete kit is here in USD... $8995, headers, OPF deletes and catalysts Mating to the stock muffler.
https://www.dundonmotorsports.com/co...street-headers
#57
#58
Rennlist Member
???? Not sure what you’re looking at...
Our complete kit is here in USD... $8995, headers, OPF deletes and catalysts Mating to the stock muffler.
https://www.dundonmotorsports.com/co...street-headers
Our complete kit is here in USD... $8995, headers, OPF deletes and catalysts Mating to the stock muffler.
https://www.dundonmotorsports.com/co...street-headers
#59
@Jamie@dundonmotorsports What are the tuning options?
ECU clone, ODB2 port flashing, dyno tuning, and e-tuning (start with base file, iterate via logs)?
ECU clone, ODB2 port flashing, dyno tuning, and e-tuning (start with base file, iterate via logs)?