Will 971.2 tail lights work in a pre facelift 971 Panamera gts?
#1
Racer
Thread Starter
Will 971.2 tail lights work in a pre facelift 971 Panamera gts?
I like the single bar look on the new updated Panamera and would like to install them on my car. Will the plug-in harness and programming work on an older model 2020 Panamera. I know the new lights do a dance when powering up. Will this work or does it need to programmed into the older car to work?
never mind found an old thread showing the different shape on the tailgate of the new lights
never mind found an old thread showing the different shape on the tailgate of the new lights
Last edited by jtorrebl; 06-02-2023 at 02:42 AM.
#2
jfyi, they are making aftermarket one that looks like it. I am awaiting for my first copy of it, as i m awaiting for it . They are aftermarket and isn't OEM, so i m waiting as they told me they are still figuring out some wiring issue, but it will work and look like 971.2
https://photos.app.goo.gl/AgMYYkmaXRgfwQVD8
https://photos.app.goo.gl/AgMYYkmaXRgfwQVD8
#3
Racer
Thread Starter
jfyi, they are making aftermarket one that looks like it. I am awaiting for my first copy of it, as i m awaiting for it . They are aftermarket and isn't OEM, so i m waiting as they told me they are still figuring out some wiring issue, but it will work and look like 971.2
https://photos.app.goo.gl/AgMYYkmaXRgfwQVD8
https://photos.app.goo.gl/AgMYYkmaXRgfwQVD8
#4
you will be surprise lmao! The light isn’t cheap anyway. It isn’t like 300-400 bucks more like 1800-1900 for the set. I bought the sport design kit and it is basically 1:1. My friend pick up the turbo spoiler and it is the same as factory. If you paying lower then the quality is lacking but anything for these high end car the quality is always spot on and the fitment is good.
#5
jfyi, they are making aftermarket one that looks like it. I am awaiting for my first copy of it, as i m awaiting for it . They are aftermarket and isn't OEM, so i m waiting as they told me they are still figuring out some wiring issue, but it will work and look like 971.2
https://photos.app.goo.gl/AgMYYkmaXRgfwQVD8
https://photos.app.goo.gl/AgMYYkmaXRgfwQVD8
I would also be interested to see if this aftermarket tail light kept the rear fog light, or even better, have that rear fog on both sides.
#6
I can't wait until you get your hands on it and post a review. I would be interested to purchase one for my vehicle as I prefer the amber turn signals. I tried purchasing the Euro Tinted Tail Light kit but was told the wiring was different though I'm sure I could have repinned them but I did not have PPN workshop access then.
I would also be interested to see if this aftermarket tail light kept the rear fog light, or even better, have that rear fog on both sides.
I would also be interested to see if this aftermarket tail light kept the rear fog light, or even better, have that rear fog on both sides.
just don’t expect it will be cheaper. They made 970.2 for 970.1 and it cost about 1k. The 971.2 solution will be around 1800-2k from what they told me.
#7
Trending Topics
#8
Racer
Thread Starter
Factory 971 lights cost 1495 usd from suncoast parts. 971.2 cost $1100. These should be around that price
https://www.suncoastparts.com/l
https://www.suncoastparts.com/l
Last edited by jtorrebl; 06-15-2023 at 03:56 AM.
The following users liked this post:
Andy Liu (06-15-2023)
#10
jfyi, they are making aftermarket one that looks like it. I am awaiting for my first copy of it, as i m awaiting for it . They are aftermarket and isn't OEM, so i m waiting as they told me they are still figuring out some wiring issue, but it will work and look like 971.2
https://photos.app.goo.gl/AgMYYkmaXRgfwQVD8
https://photos.app.goo.gl/AgMYYkmaXRgfwQVD8
Any update on these tail lights? Are they available for purchase?
#11
Factory 971 lights cost 1495 usd from suncoast parts. 971.2 cost $1100. These should be around that price
https://www.suncoastparts.com/l
https://www.suncoastparts.com/l
Just did it on my 2018
https://photos.app.goo.gl/n6JuUVDBBvYhgiJx7
#12
Racer
Thread Starter
#13
ya you can. I just spend 3 days doing adjustment for the wing and etc. and I just figure out the wiring too so a lot to do. These tail are euro spec so got to run new wires and then tap the bmc2
#14
#15
Racer
Thread Starter