jtorrebl

I like the single bar look on the new updated Panamera and would like to install them on my car. Will the plug-in harness and programming work on an older model 2020 Panamera. I know the new lights do a dance when powering up. Will this work or does it need to programmed into the older car to work?

never mind found an old thread showing the different shape on the tailgate of the new lights

Andy Liu

jfyi, they are making aftermarket one that looks like it. I am awaiting for my first copy of it, as i m awaiting for it . They are aftermarket and isn't OEM, so i m waiting as they told me they are still figuring out some wiring issue, but it will work and look like 971.2



https://photos.app.goo.gl/AgMYYkmaXRgfwQVD8

jtorrebl

sounds like a good idea but aftermarket will never compare to OEM Porsche

Andy Liu

you will be surprise lmao! The light isn’t cheap anyway. It isn’t like 300-400 bucks more like 1800-1900 for the set. I bought the sport design kit and it is basically 1:1. My friend pick up the turbo spoiler and it is the same as factory. If you paying lower then the quality is lacking but anything for these high end car the quality is always spot on and the fitment is good.

Chimuel

I can't wait until you get your hands on it and post a review. I would be interested to purchase one for my vehicle as I prefer the amber turn signals. I tried purchasing the Euro Tinted Tail Light kit but was told the wiring was different though I'm sure I could have repinned them but I did not have PPN workshop access then.

I would also be interested to see if this aftermarket tail light kept the rear fog light, or even better, have that rear fog on both sides.

Andy Liu

just don’t expect it will be cheaper. They made 970.2 for 970.1 and it cost about 1k. The 971.2 solution will be around 1800-2k from what they told me.

Chimuel

As long as the quality and functions are good, that sounds like where I expected it to be.

jtorrebl

Factory 971 lights cost 1495 usd from suncoast parts. 971.2 cost $1100. These should be around that price


https://www.suncoastparts.com/l

Andy Liu

yes it will be around there from what they told me. SO i am waiting, i guess the longer we wait the pricing should go down

Chimuel

Any update on these tail lights? Are they available for purchase?

Andy Liu

Just did it on my 2018

https://photos.app.goo.gl/n6JuUVDBBvYhgiJx7

jtorrebl

Cool look but the fit is not perfect. Can your adjust the side pieces so they align up with the center piece?

Andy Liu

ya you can. I just spend 3 days doing adjustment for the wing and etc. and I just figure out the wiring too so a lot to do. These tail are euro spec so got to run new wires and then tap the bmc2

Andy Liu

here more video for you

https://photos.app.goo.gl/iNu8Nu71d7FgWi928

jtorrebl

again cool look but the alignment is not good. Why don’t the 3 pieces edges not line up?