When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Well, phooey. Looks like I wasted a thousand bucks on a new flywheel I don't need. My noise only happens in gear (and even then only when accelerating and under 3000RPM or so) and at idle (to a lesser extent). If I'm in gear and NOT accelerating, there's no noise.
Well, phooey. Looks like I wasted a thousand bucks on a new flywheel I don't need. My noise only happens in gear (and even then only when accelerating and under 3000RPM or so) and at idle (to a lesser extent). If I'm in gear and NOT accelerating, there's no noise.
i know you’ve talked about your independent mechanic and I’m like you I love to do the work that I can and that my lack of a lift will allow however on stuff like this a really good Porsche mechanic is really good to have. I’m in California and my Indy, Koncept motor works, is a life saver. He would know for sure or tell you what he needs to do to find out. No guessing, cause guessing is no fun on a car like this!
I’m bummed you have a new flywheel you most likely don’t need, can you return it?
1) Cylinder head gasket Not likely
2) Heat exchanger coolant fitting/plastic MOST Likely
3) Other coolant fitting failure (do a search 996TT or 997TT coolant fitting failure)
4) Return coolant hose ORING failure
Don't drive your car.. Don't start your car unless you put coolant/distilled water in the Coolant reservoir >> A low coolant level CAN pop a head gasket
Don't drive your car.. Don't start your car unless you put coolant/distilled water in the Coolant reservoir >> A low coolant level CAN pop a head gasket
I'm a little surprised that these cars, with as many sensors as they have, won't tell you your coolant level. There's no warning at all aside from the piddle puddle that anything is wrong.
1) Cylinder head gasket Not likely
2) Heat exchanger coolant fitting/plastic MOST Likely
3) Other coolant fitting failure (do a search 996TT or 997TT coolant fitting failure)
4) Return coolant hose ORING failure
Don't drive your car.. Don't start your car unless you put coolant/distilled water in the Coolant reservoir >> A low
coolant level CAN pop a head gasket
if it’s #2 That’s a motor out fix, I was talking to my Indy today about it and he wants around 2500 for that one...
My lift comes in next Thursday. I get paid enough on Friday to buy a cheap daily driver. Saturday I imagine I'll install the lift. So Sunday I'll look into pulling the engine myself. I figure it'll only take a day or two my first time around.
I have enough questions that I think it's worth yanking it out and inspecting it. Depending on the outcome, I'll either repair or replace.
I would recommend trying to diagnosis your engine coolant leaks prior to pulling the engine out. This engine has multiple hose fittings and two heat exchangers plus a turbocharger recirculation pump.
God, seeing things like this make me second-guess my decision to have the dealership work on it. Install two brackets and replace an O-ring. Maybe $100 in parts, and I'm paying $1500 for it.
Mercedes - hydraulic top and the I don't know 11 or 13 cylinders that if you fix one you need to fix them all because the new fixed one will blow out the o-rings of the others. I was putting the top up once and got a shower of hydraulic fluid that looked like it was coming off a jet ski. The entire car interior and me were soaked and of course the top never made it up. $5 worth of o-rings - I think it's a $5000 job to replace them all. I sold that car for $3000 and was happy to see it go.