When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am a fellow fan of Tom's posts.
Did you see the latest thread in the 991 section??
It is shaping up to be good. GT3RS!!
I continue after all these years of Tom's posts and the extensive amount of information for fixing, repairing after track accidents, improving performance in every way that I am aware of, and it goes on and on about how much I have appreciated Tom's expert instructions.
With his help in critical areas, he has made it possible for me to drive my, similar 2007 GT3, without requiring any outside help for over 70K miles, except suspension alignment. These GT3s are the last of the Mezger production years, and among the last to repair without help.
I recommend to all who have a desire to maintain their GT3 without expensive mechanic help to read Tom's Posts, and if you are also interested in track improvement mods, he is the man!
There's someone selling a used Motec CDL3 dash on ebay. No affiliation to the seller. Found it by doing a search on ebay since I was curious on the supply chain of this product. By doing a google/shopping search it appears that a new CDL3 dash can be purchased for just a little bit more than the used one.
__________________
PCA National Instructor
TPC Racing stats:
2023 Porsche Sprint Challenge 992 Cup Am Champion
2023 Porsche Sprint Challenge GT4 Pro-Am Team Champion
2022 Porsche Sprint Challenge 992 Cup & 991 Cup Champion
2020 IMSA GT3 Cup Challenge 2nd Championship
2018 IMSA GT3 Cup Challenge 2nd Championship
2016 IMSA GT3 Cup Challenge Champion
2013 IMSA GT3 Cup Challenge Champion
2006 Rolex-24 @ Daytona GT Champion
2004 Grand-Am SGS Class Champion
I continue after all these years of Tom's posts and the extensive amount of information for fixing, repairing after track accidents, improving performance in every way that I am aware of, and it goes on and on about how much I have appreciated Tom's expert instructions.
With his help in critical areas, he has made it possible for me to drive my, similar 2007 GT3, without requiring any outside help for over 70K miles, except suspension alignment. These GT3s are the last of the Mezger production years, and among the last to repair without help.
I recommend to all who have a desire to maintain their GT3 without expensive mechanic help to read Tom's Posts, and if you are also interested in track improvement mods, he is the man!
Thank you for your kind words. Glad that you find the info helpful. And thanks for sharing The Creative Spirit story!
I have decided on staying with using front uprights from the 996/997 car generation because I don't have the time to sort out any potential 991 wheel speed sensor/ABS issues with such a conversion. As far as 996/997 front upright go here are my options-
1) 997.1 GT3 with PCCB/RS - available new
2) 997.2 GT3/RS- unavailable new, with no estimated available date
3) 997Cup - temporarily unavailable
So should I go with option #1, #1, or #1....its one of those situation.
For you entertainment I have a few different 996/997 front uprights laid out for a photo shoot. May be you guys will find it interesting to see the differences and similarities.
Upper row from left: 997 C4/Turbo/Turbo S , 996 GT3/Cup , 997 Cup '07-'13 , 997.1 GT3 w/ PCCB/RS
Lower row from left: 996 RSR/997 Cup Grand Am spec , 996 Cup World Challenge spec
Same lay out at a different angle.
Here's the differences of the steering rod-to-axle height between the GT versions. This height affects steering during suspension travel(aka bump steer).
Here's the difference of the LCA ball joint-to-axle height. This height affects vehicle roll center.
Here's my new front uprights. They are 997.1 GT3 with PCCB/RS version. Hope to find time to install them next week.
Got these sweet brackets from Stoptech to transfer my Stoptech Trophy brakes. They beautifully machined and fit perfectly. Love true bolt-on with no machining on my end!
Hi,
Any advise on the difference between the 997.1 pccb (997341158-94) vs 997.2 (158-95) front uprights?
As i require a right front but not sure if the geo for the 95 is the same as the 94.
Thanks.
Hi,
Any advise on the difference between the 997.1 pccb (997341158-94) vs 997.2 (158-95) front uprights?
As i require a right front but not sure if the geo for the 95 is the same as the 94.
Thanks.
To my surprise .2 version isn’t as motorsport oriented as .1 version. Comparatively, .2 version is ~13mm closer to axle centerline than .1 version. And I didn’t know this at the time, back in 2019, that by pure luck I got the .1 version due to availability, which turned out to be a blessing because it was directly bolt on for my .1 car. Had I gotten .2 it would have been a nightmare because .2 takes completely different type of wheel speed sensor,
Oh BTW, any shop that had claimed that they directly bolted on 997 Cup version on a .2 GT3/RS/GT2 street car with OEM ABS is completely full of something because the sensors don’t interchange. I have only done the sensor conversion mod twice in my career, which involves precisely drilling a hole on a perfectly good upright and then welding on a custom machined mounting platform to securely bolt down the different type sensor with a tolerance of +/- 0.1mm for the sensor to acquire proper wheel speed signal. I would not do the sensor mod again, unless for absurd $.
TPC Racing stats: 2022 Porsche Sprint Challenge 992 Cup Master Champion and 991 Cup Master Champion 2020 IMSA GT3 Cup Challenge Gold 2nd in Championship 2018 IMSA GT3 Cup Challenge Gold 2nd in Championship 2016 IMSA GT3 Cup Challenge Gold Champion 2013 IMSA GT3 Cup Challenge Gold Champion 2006 Rolex-24 @ Daytona GT Class Champion 2004 Grand-Am SGS Class Champion
Last edited by Tom@TPC Racing; 09-10-2023 at 11:44 PM.