"Club Sport" Roll Bar & Seat Install Complete
07-05-2007, 09:14 AM
#31
Instructor
Thread Starter
Originally Posted by willr
That's very strange. The UK brochure states:
Clubsport package: Standard on the new 911GT3 RS, a no-cost option on the 911GT3, the Clubsport package provides additional protection during trackday or competition use. Included with the package are a bolt-in rear roll cage behind the front seats,a six-point racing harness in red for the driver’s side (not fitted),a fire extinguisher with mounting bracket (not fitted) and a preparation for a battery master switch available from Porsche Motorsport
I'm certainly expecting to get a 6 point harness on mine!
Clubsport package: Standard on the new 911GT3 RS, a no-cost option on the 911GT3, the Clubsport package provides additional protection during trackday or competition use. Included with the package are a bolt-in rear roll cage behind the front seats,a six-point racing harness in red for the driver’s side (not fitted),a fire extinguisher with mounting bracket (not fitted) and a preparation for a battery master switch available from Porsche Motorsport
I'm certainly expecting to get a 6 point harness on mine!
07-05-2007, 10:31 AM
#34
Burning Brakes
Join Date: Aug 2005
Location: Cambridge, MA
Posts: 807
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lumpking
I ordered the plates from Champion, but after seeing your version, I'm begining to second guess the purchase. Not too sure about drilling holes in the chassie. Opinions please.
07-05-2007, 04:51 PM
#36
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Originally Posted by RMN22AJR
I would too based on your guide. What kills me is the "a no-cost option" if you only understood how much time, effort & $$$$ I have put into chasing the "Clubsport" package. Enjoy the car is amazing!!!!!
__________________
.
The apex of performance, comfort & safety since 2011.
All new racewear available now→ traqgear.com
.
The apex of performance, comfort & safety since 2011.
All new racewear available now→ traqgear.com
07-05-2007, 05:39 PM
#37
Sub belts
We are just screwing the eye bolts on the car, as it comes with the screw holes already on floor board; however, the idea of being able to move the seat along with the sub belt mount is a good one. Please provide contact info for this vendor. Also, would appreciate additional pics of the seats, brackets, etc. We are also installing the same seats in cloth. Also, please note GMG rear roll bar/cage does not require any drilling on car.
Thanks!
Thanks!
07-06-2007, 02:06 AM
#38
Instructor
Thread Starter
Originally Posted by tcracing
We are just screwing the eye bolts on the car, as it comes with the screw holes already on floor board; however, the idea of being able to move the seat along with the sub belt mount is a good one. Please provide contact info for this vendor. Also, would appreciate additional pics of the seats, brackets, etc. We are also installing the same seats in cloth. Also, please note GMG rear roll bar/cage does not require any drilling on car.
Thanks!
Thanks!
07-08-2007, 06:16 PM
#40
Instructor
Thread Starter
Originally Posted by oh yea
If porsche is supplying 6 point for other than US buyers do they have a sub strap bar and if so anybody know the part number
Thanks,
Thanks,
Secondly, Schroth does offer a sub strap bar for the 996 seats. This bar will work on the 997 seats if you mount the seats in the upper position. If you desire the seats as low as possible you need to go to plan "B" as we did.
Call Bob Brooks at DWR if you would like to order - he is a Schroth dealer who understands the "Clubsport" package.
07-08-2007, 06:21 PM
#41
Instructor
Thread Starter
Originally Posted by oh yea
Can you tell me which warnings you ran into and how you dealt with them.
Thanks!!!
Thanks!!!
