Installed Rollbar in RS Yet?
#47
Rennlist Member
So, why do people put the roll bar in? It does not appear to have any side beam protection-which is kind of nice if one is T-boned!
#49
This whole discussion is on roll bars. When I looked at pictures on www.wreckedexotics.com/
a few years back as I tried to decide what to do with my regular 996, it looked to me that the front pillar (?) collapsed when there was just a roll bar, thus the driver would be partially crushed. So I put in a full cage. Are the GT3s and GT2s stronger there, or is the risk still as great? Or my thinking faulty?
a few years back as I tried to decide what to do with my regular 996, it looked to me that the front pillar (?) collapsed when there was just a roll bar, thus the driver would be partially crushed. So I put in a full cage. Are the GT3s and GT2s stronger there, or is the risk still as great? Or my thinking faulty?
#51
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
lucky dog, fred.
i am 2569, not plate.
i am 2569, not plate.
#53
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Originally Posted by DJ 996
That plate looks like it would be pretty simple to fabricate, any good race shop could do it.
i had similar plates done to my 996c2, c4s, gt3 in the past.
#55
Drifting
Fred,
Would you be kind enough to take a few more pictures of your bar for me, before you put it in?
Well, anytime really.
I'm particularly interested in a view side on so I can see how much of a rearward 'kick' the cross pieces have. Also, the feet where it bolts to the floor.
One more thing, those plates that are welded in to the floor with the three bolts, can you see any of that from under the car? Or do the bolts have flush mounting heads that are sandwiched between the plate and the floor?
Congratulations on a fantastic car!
Thanks
Would you be kind enough to take a few more pictures of your bar for me, before you put it in?
Well, anytime really.
I'm particularly interested in a view side on so I can see how much of a rearward 'kick' the cross pieces have. Also, the feet where it bolts to the floor.
One more thing, those plates that are welded in to the floor with the three bolts, can you see any of that from under the car? Or do the bolts have flush mounting heads that are sandwiched between the plate and the floor?
Congratulations on a fantastic car!
Thanks
#56
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Awesome CoGT3!
[QUOTE=CoGT3]Finally got them!
Are those the Euro seats as well that are original for the RS? If so, cost and will the seats fit a 6'2" musclehead? Blue belts standard?
Are those the Euro seats as well that are original for the RS? If so, cost and will the seats fit a 6'2" musclehead? Blue belts standard?
__________________
.
The apex of performance, comfort & safety since 2011.
All new racewear available now→ traqgear.com
.
The apex of performance, comfort & safety since 2011.
All new racewear available now→ traqgear.com
Last edited by TraqGear; 05-19-2007 at 12:56 PM. Reason: Wrong name