What did you do to your GT car today!
The following 3 users liked this post by widers911:
10-27-2023 | 09:25 PM
#783
Rennlist Member
Joined: Mar 2013
Posts: 8,875
Likes: 3,290
The following users liked this post:
widers911 (10-27-2023)
The following 3 users liked this post by Elliotw44:
10-28-2023 | 06:20 AM
#785
Thread Starter
Rennlist Member
Joined: Jan 2011
Posts: 9,456
Likes: 3,076
From: West Coast
Alcantara looks new but the wheel looks used. Can I ask who did the wrap? Also, you can eliminate the shiny spoke ends with a light touch of a scotch bite pad and some compound. It's a tricky method but can be successfully done. Testors paint also carries some matte clear that can be applied, if the shine bothers you.
Several things I see with this is that it's black and unless your vents are black, it's not going to match. Also, this looks to be a vinyl airbag so you may want to change out the spoke bezel and the airbag with your current one.
Several things I see with this is that it's black and unless your vents are black, it's not going to match. Also, this looks to be a vinyl airbag so you may want to change out the spoke bezel and the airbag with your current one.
Last edited by RAudi Driver; 10-28-2023 at 07:24 AM.
The following 2 users liked this post by RAudi Driver:
Robocop305 (10-29-2023),
vudores (10-29-2023)
The following users liked this post:
GTTommy (10-29-2023)
10-28-2023 | 04:53 PM
#789
Rennlist Member
Joined: Oct 2020
Posts: 1,833
Likes: 1,215
From: Boise
Alcantara looks new but the wheel looks used. Can I ask who did the wrap? Also, you can eliminate the shiny spoke ends with a light touch of a scotch bite pad and some compound. It's a tricky method but can be successfully done. Testors paint also carries some matte clear that can be applied, if the shine bothers you.
Several things I see with this is that it's black and unless your vents are black, it's not going to match. Also, this looks to be a vinyl airbag so you may want to change out the spoke bezel and the airbag with your current one.
Several things I see with this is that it's black and unless your vents are black, it's not going to match. Also, this looks to be a vinyl airbag so you may want to change out the spoke bezel and the airbag with your current one.
or wait your talking about the color of the Alcantara also, is it black?
Last edited by Wonderdan; 10-29-2023 at 03:41 AM.
10-28-2023 | 07:08 PM
#790
Rennlist Member
Joined: Sep 2018
Posts: 1,159
Likes: 1,064
From: Seattle, WA
Alcantara looks new but the wheel looks used. Can I ask who did the wrap? Also, you can eliminate the shiny spoke ends with a light touch of a scotch bite pad and some compound. It's a tricky method but can be successfully done. Testors paint also carries some matte clear that can be applied, if the shine bothers you.
Several things I see with this is that it's black and unless your vents are black, it's not going to match. Also, this looks to be a vinyl airbag so you may want to change out the spoke bezel and the airbag with your current one.
Several things I see with this is that it's black and unless your vents are black, it's not going to match. Also, this looks to be a vinyl airbag so you may want to change out the spoke bezel and the airbag with your current one.
Last edited by Elliotw44; 10-28-2023 at 07:11 PM.
10-28-2023 | 07:24 PM
#791
Rennlist Member
Joined: Oct 2020
Posts: 1,833
Likes: 1,215
From: Boise
Sharp eye as always! This was a new to me steering wheel that I refinished in alch(from leather). All grey is out of my interior(CF vents and trims, shark blue shifter trim) so this should match better. nwcrafted did the wrap. Fresh Alch and no padding like factory. I actually prefer the black center trim for this design.
10-28-2023 | 07:32 PM
#792
Rennlist Member
Joined: Sep 2018
Posts: 1,159
Likes: 1,064
From: Seattle, WA
LOVE my cupholders! For all the driving I do its nice to have a place to keep a open drink. especially on longer drives. plus its an excuse to make the GT3RS the coffee run car lol.
10-28-2023 | 10:28 PM
#794
Thread Starter
Rennlist Member
Joined: Jan 2011
Posts: 9,456
Likes: 3,076
From: West Coast
Sharp eye as always! This was a new to me steering wheel that I refinished in alch(from leather). All grey is out of my interior(CF vents and trims, shark blue shifter trim) so this should match better. nwcrafted did the wrap. Fresh Alch and no padding like factory. I actually prefer the black center trim for this design.
The following users liked this post:
Elliotw44 (10-29-2023)