When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I haven't done any cosmetic mods in quite a while and had debated adding door pull straps when I first got the car since they would match the other red accents in the car so well; there's the danger of going overboard when applying accents (i.e colored air vents). After consideration I picked up and installed a set of the custom door pull straps currently manufactured and sold by a fellow Rennlister I'm sure some of you have seen lately.
The likeness to the original is impressive, installation was a cinch and they look the business.
These pics from a few years ago are terrible quality.. sorry guys.
The lettering was originally white and I changed it to red myself.
And I bought these in my infant 997 ownership months. What I thought were Rennline were probably knock offs. They are at least good quality though and have held up great. Look like new. Sorry to say also that I don't remember where I sourced them.
No worries. I poked around on eBay and found a couple of used sets in silver that are otherwise identical to yours. One set was $160 and the other was $40. Needless to say, I bought the $40 set. I'm very pleased with them. I managed to install the dead pedal, clutch, and gas without any drama. The brake pedal is being a pain though, since it is metal and I have broken 5 drill bits on it. I've given up on it and am going to have my shop do the last pedal for me... I'm still happy with what I did manage to accomplish though!
Am I the only one that can't get on board with the wheels? The rest of the car, this thread, everything he's done is very impressive. But. Them wheels? I just can't.
Everyone's entitled to an opinion. Totally get it.
There's no arguing with you on asthetics because its subjective. That's just a futile point. I'm right, you're right. Everyone is right on how they think they look.
But if we're talking function, I'll defend that all day long.
BBS E88s are arguably the best track wheel ever made for a 5 lug 911. They are incredibly light, strong and easy to mend. in fact, their center-lock faced siblings are used by cup car, IMSA, Porsche Club race, etc etc. I could extol the virtues of BBS 3 piece wheels in many paragraphs and still not encompass what they have accomplished.
And for what you get they are a great value too.
There are many people who value the form of function. I happen to be one of them.
Everyone's entitled to an opinion. Totally get it.
There's no arguing with you on asthetics because its subjective. That's just a futile point. I'm right, you're right. Everyone is right on how they think they look.
But if we're talking function, I'll defend that all day long.
BBS E88s are arguably the best track wheel ever made for a 5 lug 911. They are incredibly light, strong and easy to mend. in fact, their center-lock faced siblings are used by cup car, IMSA, Porsche Club race, etc etc. I could extol the virtues of BBS 3 piece wheels in many paragraphs and still not encompass what they have accomplished.
And for what you get they are a great value too.
There are many people who value the form of function. I happen to be one of them.
BBS or GTFO. Miss my LMs and LM-Rs. Nothing else I'd ever buy, except maybe certain Forgelines and a few HRE models. And forged OEM Otto Fuchs are top-notch. Too much of everything else, these days, is cosmetic junk....
He was served a dynamic geo targeted Turo ad that featured my 'listing' on Turo. I put that in quotations because if you actually read the listing it's a complete joke; I was just testing out their site.
Gross. Maroon caliper, cracks a plenty, heat rust and though you can't see it the dust boots were cracked and disintegrating.
I'm installing 6 pot Brembos from a 997.1 GT3 that I sourced from Tom Chan at TPC to help with additional cooling and brake power.
So shiny. Thanks, Tom!
The set I bought from him included all the hardware, pads and hard lines but I wasn't sure which lines fit the car. The only way to do a mock up was to actually remove the rotors and calipers which is too difficult and time consuming for me to do TWICE in my public parking garage space. So I relied on Pelican to help me source the correct part. It took three weeks to arrive from the motherland and turned out to be the wrong part. It was obvious they were going to be too long. Pelican was nice enough to take them back and pay return shipping after I walked them through this. So swing and a miss this time, but that's certainly not the norm.
1) The first part is the one that came off my car a 2012 997 Carrera GTS with OEM 4 pot brembo calipers (caliper part number 996 351 429 10)
2) This part is the one that fits my car with 6 pot brembo calipers (caliper part number 996 351 431 30)
3) This part is the one the parts agent at Pelican told me would fit but it clearly doesn't. It requires a car with a different upright which turns out to be the Carrera 4GTS.
So I did a few hours of research that I admittedly should have done from the start and created this handy chart.
Anyone converting a 4 pot brake system to a 6 pot brake system should reference this to understand how the caliper, upright, brake lines and brake line bracket fit together as a system.
It turns out the GT3 lines that Tom supplied me were the correct lines the entire time.
**Note the pics I currently have are terrible. Lighting is minimal in this garage and I have to do the work after sundown when my kid and wife are asleep. These are my witching hours. Better pics and more info as I finish this up this week.
I had an interesting time with the 350mm rotors.
They were purchased from the RL marketplace with 50% life left but the hats were an odd part number that Girodisc doesn't use. I called them to verify the number and while it is the correct size and hat, the number is an old part # used when RSS used to make Girodisc's hats. Girodisc said that if I sent them back to get them out of circulation that they would comp me new hats and discounted rings. They also threw in spacers and bolts for the rears so I could run 350mm rotors in the rear. Score!! So great service by those guys.
Here is a comparison of each rotor and caliper at the correct scale as measured by the space between studs.
Though the calipers didn't need to be rebuilt, I had them repainted and rebuilt with new seals and dust boots locally and they turned out great!
Next up:
I have GT2 brake ducts that I've mocked up but they will need some trimming and will be my next project after breaking these in.. so to speak. I'm going to document that process in detail so in the future others know how to trim the GT2 ducts to fit our cars.
I've been debating my Porsche magazine subscriptions lately and cancelled my Excellence sub. I decided to take the plunge into Pete Stout's new venture and just got this tonight.
Yes it's pricey but that's offset by the free stickers. In all seriousness though the total pages dedicated to content over the year subscription are 3x what Excellence was. Plus this content is better.
And its beautiful so there's that.
Ill spend the the rest of my life hunting down volume 1 though (my first issue was 002). If anybody wants to sell theirs I'm a buyer today.
Gross. Maroon caliper, cracks a plenty, heat rust and though you can't see it the dust boots were cracked and disintegrating.
I'm installing 6 pot Brembos from a 997.1 GT3 that I sourced from Tom Chan at TPC to help with additional cooling and brake power.
So shiny. Thanks, Tom!
The set I bought from him included all the hardware, pads and hard lines but I wasn't sure which lines fit the car. The only way to do a mock up was to actually remove the rotors and calipers which is too difficult and time consuming for me to do TWICE in my public parking garage space. So I relied on Pelican to help me source the correct part. It took three weeks to arrive from the motherland and turned out to be the wrong part. It was obvious they were going to be too long. Pelican was nice enough to take them back and pay return shipping after I walked them through this. So swing and a miss this time, but that's certainly not the norm.
1) The first part is the one that came off my car a 2012 997 Carrera GTS with OEM 4 pot brembo calipers (caliper part number 996 351 429 10)
2) This part is the one that fits my car with 6 pot brembo calipers (caliper part number 996 351 431 30)
3) This part is the one the parts agent at Pelican told me would fit but it clearly doesn't. It requires a car with a different upright which turns out to be the Carrera 4GTS.
So I did a few hours of research that I admittedly should have done from the start and created this handy chart.
Anyone converting a 4 pot brake system to a 6 pot brake system should reference this to understand how the caliper, upright, brake lines and brake line bracket fit together as a system.
It turns out the GT3 lines that Tom supplied me were the correct lines the entire time.
**Note the pics I currently have are terrible. Lighting is minimal in this garage and I have to do the work after sundown when my kid and wife are asleep. These are my witching hours. Better pics and more info as I finish this up this week.
It's a bummer you had all that trouble with the hardlines. For the amount of time you track your car, you should be inspecting your caliper brake seals at least once a year. This means pulling your caliper off the car. This is done much easier by a replacing the hard lines with braided lines from Spiegler. I'll be doing this when I upgrade my calipers to Brembo's new M6 monoblock calipers.
It's a bummer you had all that trouble with the hardlines. For the amount of time you track your car, you should be inspecting your caliper brake seals at least once a year. This means pulling your caliper off the car. This is done much easier by a replacing the hard lines with braided lines from Spiegler.
The suspension, underbody and brake system gets an inspection immediately following every track day.
I considered braided lines and they certainly would help caliper R&R, but remember, these calipers do not have a bridge so the pads can be removed at all four corners without pulling the calipers. I can and do check the seals (dust boots) while the calipers are still mounted. Less R&R of the calipers means less strain on the bolt holes and hardware.
A couple dust boots were toast at this point which is one reason I decided to make the change now. You are correct though that the piston seals can't be checked unless I disassemble the caliper.
Braided lines and either timeserting the caliper bolt holes with steel timeserts or adding bolt studs are good suggestions to preserve one's upright for those who will R&R calipers more frequently.
I've been debating my Porsche magazine subscriptions lately and cancelled my Excellence sub. I decided to take the plunge into Pete Stout's new venture and just got this tonight.
Theon Goes Full Carbon Fiber With Stunning New Build
Slideshow: Built around a carbon-bodied 964 and a naturally aspirated 4.0-liter flat-six, this bespoke commission highlights how far the restomod formula has evolved.
Tuner Is Converting Porsche 911s Into Shooting Brakes
Slideshow: A Polish Porsche specialist is moving ahead with one of the most unusual 911 conversions in recent memory: a shooting brake version of the 991-generation sports car.
This Coachbuilt Creation Is A Modern Take on the Legendary Porsche 917
Slideshow: A Porsche Carrera GT has been transformed into a one-off coachbuilt machine that blends analog supercar engineering with styling inspired by the legendary 917 race cars.
Is This Convertible Cayenne A Steal, Or A Returnless Investment?
Slideshow: A heavily modified Porsche Cayenne convertible with faux wood trim and a long list of flaws recently sold at auction for surprisingly little money.
Porsche's Top 5 Most Questionable Naming Decisions
Slideshow: For a company obsessed with engineering precision, Porsche has occasionally named its cars in ways that left even loyal enthusiasts scratching their heads.
Pogea Racing's 964 Porsche 911 Reimagination Stands Out in a Crowded Field
Slideshow: Pogea Racing's latest Porsche 964 project blends carbon-fiber construction, modern chassis upgrades, and up to 500 horsepower while keeping the air-cooled 911 experience firmly analog.
It was obvious they were going to be too long. Pelican was nice enough to take them back and pay return shipping after I walked them through this. So swing and a miss this time, but that's certainly not the norm.
