Notices
997 Forum 2005-2012
Sponsored by:
Sponsored by:

PCM 3.0 Integrated Wireless CarPlay/ Android Auto

Thread Tools
 
Search this Thread
 
Old 12-26-2020, 01:31 PM
  #16  
doclouie
Three Wheelin'
 
doclouie's Avatar
 
Join Date: Mar 2017
Location: Texas
Posts: 1,339
Received 188 Likes on 124 Posts
Default

Originally Posted by Kitc2246
I have a 2013 981. Been waiting to add the back-up camera. NAV maps are way out of date, but the price for new ones seems way high. My car has Voice Command obviously with an internal mic. Probably a question for Nick, but would my Voice Command (mic) integrate?

Same question on camera: BT or wired?

I'll keep my eye on this. Guessing it will eventual get across the pond.
I asked Nick a question and he is out of the office until the 5th for the Holidays. He was super responsive so I am sure he will get back later that week.
Old 12-26-2020, 01:34 PM
  #17  
Bxstr
Rennlist Member
 
Bxstr's Avatar
 
Join Date: Mar 2013
Posts: 8,563
Likes: 0
Received 3,099 Likes on 2,119 Posts
Default

That looks amazing. Thanks for sharing.
Old 12-26-2020, 02:25 PM
  #18  
VT Blue
Rennlist Member
 
VT Blue's Avatar
 
Join Date: Apr 2020
Location: Green Mountains
Posts: 626
Received 312 Likes on 197 Posts
Default

@jibmaster1, @Kitc2246 and @doclouie, I believe it is wired based upon this portion of a fact sheet I received from Nick some time ago.


Others may be decipher better than me, but anytime I see "composite" it would make me think wired is an option. YMMV.


Thx!

Bob

The following users liked this post:
jibmaster1 (12-27-2020)
Old 12-26-2020, 03:04 PM
  #19  
Quixotic1
Rennlist Member
 
Quixotic1's Avatar
 
Join Date: Oct 2020
Location: Florida / North Carolina
Posts: 304
Received 89 Likes on 52 Posts
Default

I want one too!

Last edited by Quixotic1; 12-26-2020 at 03:22 PM.
Old 12-26-2020, 04:28 PM
  #20  
whacko77uk
Advanced
Thread Starter
 
whacko77uk's Avatar
 
Join Date: Jul 2012
Location: London UK
Posts: 99
Received 88 Likes on 33 Posts
Default

You can add a front and back up camera, both are hard wired. My reverse camera is activated by putting the car into reverse, this brings up the camera automatically whether using PCM or CarPlay.

The front camera is activated from an icon on the CarPlay start up screen I believe as I have seen the icon but don’t have one installed.

I use the car mics for calls and leave the phone still connected by Bluetooth. You can set up the phone to route calls by Bluetooth.

However I have the kit mic installed below the steering wheel (out of obvious sight) as this is needed for Siri.

Old 12-27-2020, 01:56 PM
  #21  
ATX_Native
Rennlist Member
 
ATX_Native's Avatar
 
Join Date: Sep 2017
Location: Austin, TX
Posts: 1,176
Received 774 Likes on 421 Posts
Default

Not seeing the PCM 3.0 on their website, just PCM 3.1+.

Do you have to email them to order the 3.0 kit?
Old 12-27-2020, 02:33 PM
  #22  
Quixotic1
Rennlist Member
 
Quixotic1's Avatar
 
Join Date: Oct 2020
Location: Florida / North Carolina
Posts: 304
Received 89 Likes on 52 Posts
Default

The unit costs about $615 shipped to the US. This does not include cameras. Installation for just the kit is about 5hrs.

Nick emailed me the installation instructions so I can send it to my installer for an estimate. I have attached them here.


Last edited by Quixotic1; 03-10-2021 at 05:32 PM.
The following users liked this post:
VT Blue (12-27-2020)
Old 12-27-2020, 03:44 PM
  #23  
skarkp
Rennlist Member
 
skarkp's Avatar
 
Join Date: Aug 2020
Location: CA
Posts: 78
Received 14 Likes on 12 Posts
Default

To use andriod auto, is it bluetooth/wireless or needs to be connected via usb. Also any main different compared to joeyauto version? Also seen good reviews for this unit. https://www.joyeauto.com/porsche-pcm...play-solution/
Old 12-27-2020, 04:00 PM
  #24  
VT Blue
Rennlist Member
 
VT Blue's Avatar
 
Join Date: Apr 2020
Location: Green Mountains
Posts: 626
Received 312 Likes on 197 Posts
Default

Originally Posted by ATX_Native
Not seeing the PCM 3.0 on their website, just PCM 3.1+.

Do you have to email them to order the 3.0 kit?
I do not believe Nick has posted it yet on his site.

Bob
The following users liked this post:
ATX_Native (12-27-2020)
Old 12-27-2020, 04:05 PM
  #25  
Quixotic1
Rennlist Member
 
Quixotic1's Avatar
 
Join Date: Oct 2020
Location: Florida / North Carolina
Posts: 304
Received 89 Likes on 52 Posts
Default

Originally Posted by skarkp
To use andriod auto, is it bluetooth/wireless or needs to be connected via usb. Also any main different compared to joeyauto version? Also seen good reviews for this unit. https://www.joyeauto.com/porsche-pcm...play-solution/
It looks to me like this unit you cited is for PCM 3.1 not the PCM 3.0 our 997 models have.
Old 12-27-2020, 04:22 PM
  #26  
doclouie
Three Wheelin'
 
doclouie's Avatar
 
Join Date: Mar 2017
Location: Texas
Posts: 1,339
Received 188 Likes on 124 Posts
Default

Originally Posted by Quixotic1
It looks to me like this unit you cited is for PCM 3.1 not the PCM 3.0 our 997 models have.
Nick just sent me the updated instructions today and they are for the 3.0. He also sent me a PayPal link to pay. He will only be shipping units out on Wednesday of this week.


The following 2 users liked this post by doclouie:
ATX_Native (12-27-2020), GrumpyCat (12-27-2020)
Old 12-27-2020, 06:46 PM
  #27  
GrumpyCat
Rennlist Member
 
GrumpyCat's Avatar
 
Join Date: Dec 2020
Location: Queens,ny
Posts: 43
Received 14 Likes on 7 Posts
Default

Originally Posted by doclouie
Well that was super quick. I heard back from them and it is 425 pounds for the unit and 35 pounds for shipping to the USA. Or about $575+$47 dollars.
You getting it ?
Old 12-28-2020, 05:39 AM
  #28  
whacko77uk
Advanced
Thread Starter
 
whacko77uk's Avatar
 
Join Date: Jul 2012
Location: London UK
Posts: 99
Received 88 Likes on 33 Posts
Default

I used an installer in London recommended by Nick who have done numerous installs and it took the shop 3 hours to fit the kit and install a hard wired reverse camera.

If you have the right tools and know what you are doing this won’t take much more than an hour, the PCM unit was removed in about 10 mins.

Routing the camera cable through the car is time consuming, otherwise it would have been done in 90 mins.

Use a shop who is familiar with the PCM 3.1 install as it is virtually the same.

All the cables and the box are neatly stored behind the PCM stack, access can be gained at any time by removing the leather panel at the side of the PCM. Updates, wired CarPlay and charging can be done through the USB routed to the glovebox.

I use wireless CarPlay and have a MagSafe charger in the glovebox, this keeps the phone charged on longer drives. Modern iPhones are too large for the centre console otherwise that would have been a perfect wireless charging spot.

For reference I paid £300 + tax for the CarPlay install and £250 + tax for the camera install which included the supply of a high quality camera with a Sony sensor which is tiny and looks OEM.
The following 2 users liked this post by whacko77uk:
ATX_Native (12-28-2020), VT Blue (12-28-2020)
Old 12-28-2020, 08:42 AM
  #29  
doclouie
Three Wheelin'
 
doclouie's Avatar
 
Join Date: Mar 2017
Location: Texas
Posts: 1,339
Received 188 Likes on 124 Posts
Default

Do you have a link to the camera you used? All I am finding are ones that definitely do not look OEM. My order will ship out this Wednesday and I will document the whole thing so people can see.
The following 2 users liked this post by doclouie:
mikes70 (12-28-2020), whacko77uk (12-28-2020)
Old 12-28-2020, 11:45 AM
  #30  
whacko77uk
Advanced
Thread Starter
 
whacko77uk's Avatar
 
Join Date: Jul 2012
Location: London UK
Posts: 99
Received 88 Likes on 33 Posts
Default

Unfortunately the shop is closed till 4 Jan however I have attached a pic for reference.





Last edited by whacko77uk; 12-28-2020 at 11:51 AM.


Quick Reply: PCM 3.0 Integrated Wireless CarPlay/ Android Auto



All times are GMT -3. The time now is 10:44 PM.