When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi Gary, congrats on your car!! Very nicely done. I´ve just bought a 2006 997.1 C2 manual, and I´m starting with the mods. One mod I´m planning to do is install the Momo 07 steering wheel. How did you disabled the airbag light? Any advice is welcomed-
I used the advice from J Tan, so I also went w the Worksbell hub it’s a company out of Japan and they make a custom short hub that comes w the right ohm cross over and doesn’t require trimming of any of the stock parts too https://rennlist.com/forums/diy-subm...g-hub-diy.html
details in the above thread
I’m really happy w the mod7 wheel
Sent it to Don@dallascustoms to recover it and just received it today
Will be replacing my alcantara stock sport wheel w a momo mod 7 shortly.... hoping it’s not a bad idea but the wheel looks amazing! Will eventually have it recovered as well to remove the yellow stripe once everything is set up properly and I like it
Hi Gary, thinking about the same steering wheel, and I also want to get the yellow out. Did you managed to do that? Do you have some pictures?
Hi Gary, thinking about the same steering wheel, and I also want to get the yellow out. Did you managed to do that? Do you have some pictures?
I had the stripe recovered by don @ Dallas custom so the whole wheel is redone I posted a pic above.
the momo logo is really simple just get some 100% acetate from amazon or something and use a q-tip and after several swipes the yellow comes up, I used a tooth pick to lift up the letters once the acetate did it’s job. It also doesn’t harm the anodized wheel which I was worried about.
Before pic After pic. ( I have 2 momo wheels I experimented on my old one first)
I used the advice from J Tan, so I also went w the Worksbell hub it’s a company out of Japan and they make a custom short hub that comes w the right ohm cross over and doesn’t require trimming of any of the stock parts too https://rennlist.com/forums/diy-subm...g-hub-diy.html
details in the above thread
I’m really happy w the mod7 wheel
Sent it to Don@dallascustoms to recover it and just received it today
Very nice set up!! Congrats! Tks for the tips. Do you have more pics?
a couple months in and this wheel is basically perfect. at some point i may change out the silver trim for black at some point and could consider some tweaks to upgrade the outer wheel itself.
991.2 GT sport wheel. Always wanted to do it since I learned it was even possible to fit one to a 997. I have installed the Paul Li adapter, but I still need the 997 613 289 01 steering column module to get the MF controls working. Gives cabin a real lift. Haters can hate on the buttons, but its an alternative to touching them sticky PCM *****
a couple months in and this wheel is basically perfect. at some point i may change out the silver trim for black at some point and could consider some tweaks to upgrade the outer wheel itself.
Looks great. Those PCM ***** are available for small money from Suncoast and easy to replace.
Sport Design paddle wheel non MF going on my non-MF 997.1 Turbo. I have the airbag. What else do I need, PN-wise for this to work?? I know there's probably a thread somewhere, but I can't find one.