911obsession Build Thread | Platinum Silver | 997.2 Carrera | Quality Photos
The following users liked this post:
preelude (10-15-2023)
#348
I think BBS were the first to design a wheel now seen in similar designs, moving more from the multi-spoke LM style to the F1-R style. I fell in love with these but never see many quite as perfect as these and for me a 997 looks better with a slightly older style like the KL12's of HRE FF01. But it is personal choice !
(This picture got me drweling about how I could get 18's on my 991 GT3 !)
(This picture got me drweling about how I could get 18's on my 991 GT3 !)
The following users liked this post:
preelude (10-15-2023)
#349
Racer
Thread Starter
They are BC Forged KL01
Yes sir!
That sounds correct
They are BC KL01
https://bcforged-na.com/monoblock/kl01/
https://bcforged-na.com/monoblock/kl01/
I think BBS were the first to design a wheel now seen in similar designs, moving more from the multi-spoke LM style to the F1-R style. I fell in love with these but never see many quite as perfect as these and for me a 997 looks better with a slightly older style like the KL12's of HRE FF01. But it is personal choice !
#350
Racer
Thread Starter
Little update, I switched out the MRG Titanium Lug Bolts for an MRG Titanium Stud Kit, also added 5mm rear spacers making the effective rear offset +48.
Last edited by preelude; 10-15-2023 at 01:37 PM.
The following 5 users liked this post by preelude:
Bwoy1981 (10-16-2023),
DesmoSD (10-16-2023),
Kineticdg (04-25-2024),
Pedro Lopes (11-10-2023),
VT Blue (10-15-2023)
#351
Rennlist Member
#352
Rennlist Member
#353
Racer
Thread Starter
#354
Racer
Thread Starter
The following users liked this post:
groovzilla (10-15-2023)
#355
Looks great as ever, amazed you are running ET48 at the rear. I am running 305/30 on KL 12x19 ET58 and I have zero issued but doesn't look like I'd get away with another 10mm !
#356
Racer
Thread Starter
Thank you!
The following users liked this post:
Carrera2RS (02-21-2024)
#358
Racer
Thread Starter
I like the tune, the bolts-ons were mainly for sound but I'm sure that the long tube catless headers contributed to some decent gains. The tune made a huge difference in the mid range, I haven't dyno'd it but it definitely pulls harder than a stock .2 S.
#359
Racer
Thread Starter
Fashion Shoot | October 2023
Some photos from a fashion shoot last fall, the 911 was used as prop in the set. I was given permission to snap some BTS pics so I jumped on the opportunity
The following 9 users liked this post by preelude:
415CPA (02-21-2024),
bronz (02-21-2024),
Busta Rib (02-21-2024),
Carrera2RS (02-21-2024),
Graufuchs (02-24-2024),
and 4 others liked this post.