What did you do to your 996TT today?
12-12-2014, 09:48 AM
#1081
Three Wheelin'
Check valve #1: 996 110 135 70
Check valve #2: 996 110 145 71 (dealer calls it a vent line)
One of the above has a hose/line already attached to it, the other does not.
The metal oil lines were checked to make sure they were not seized up. May go for a turbo upgrade next year, and did not want any surprises just in case.
Check valve #2: 996 110 145 71 (dealer calls it a vent line)
One of the above has a hose/line already attached to it, the other does not.
The metal oil lines were checked to make sure they were not seized up. May go for a turbo upgrade next year, and did not want any surprises just in case.
In fact my lines were seized and I had to replace them. The other parts added to my next shopping list ;-) Thanks a lot !
12-13-2014, 12:52 AM
#1082
I Installed a new 997 short shifter best MOD so far I wish I would've done this six years ago it's amazing how much of a difference it is over the stock set up and how precise the shifter is. Install took less then 2 hours but if I had to do it again I could do in 45 min or less.
12-13-2014, 01:55 AM
#1083
factory 996TT shifter is horrible IMO...everyone should do an upgrade.
I Installed a new 997 short shifter best MOD so far I wish I would've done this six years ago it's amazing how much of a difference it is over the stock set up and how precise the shifter is. Install took less then 2 hours but if I had to do it again I could do in 45 min or less.
12-13-2014, 03:28 AM
#1084
Rennlist Member
And the beat goes on
Numeric shifter and cables (Thanks S.C.B. for all the help in getting that sorted)
RUF steering wheel (Thanks Al)( worth every bit of freaking agro, and then some! Al of course probably feels differently)
New alpine to replace one bunged up during install
Rennline strut tower brace
Wevo yellow engine mounts
Upcoming....
Agency power exhaust install this month
Possible new clutch (remains to be seen, shop having a look-see )
EVOMS lightweight pulley and belt
UMW flash coming soon.
RUF 19's
Stuff that will be available shortly:
Wheels and tires, PS2 (N) F75%R99.5% OEM 2001 TT's
CDR Head-unit
EVOMS air box-200.00 Canadian
Also have a set of X5 4.6is sport seats in excellent condition( I put comfort seats in to replace same) 500 Canadian (Kingston Ontario) local pick up I'm out of country.
RUF steering wheel (Thanks Al)( worth every bit of freaking agro, and then some! Al of course probably feels differently)
New alpine to replace one bunged up during install
Rennline strut tower brace
Wevo yellow engine mounts
Upcoming....
Agency power exhaust install this month
Possible new clutch (remains to be seen, shop having a look-see )
EVOMS lightweight pulley and belt
UMW flash coming soon.
RUF 19's
Stuff that will be available shortly:
Wheels and tires, PS2 (N) F75%R99.5% OEM 2001 TT's
CDR Head-unit
EVOMS air box-200.00 Canadian
Also have a set of X5 4.6is sport seats in excellent condition( I put comfort seats in to replace same) 500 Canadian (Kingston Ontario) local pick up I'm out of country.
12-13-2014, 05:24 AM
#1086
I've got the 997 short shift, 997 transmission mount and F1st insert....nice tight and crisp changes.
12-13-2014, 10:56 AM
#1087
Burning Brakes
I Installed a new 997 short shifter best MOD so far I wish I would've done this six years ago it's amazing how much of a difference it is over the stock set up and how precise the shifter is. Install took less then 2 hours but if I had to do it again I could do in 45 min or less.
12-13-2014, 11:43 AM
#1088
!["02996ttx50's Avatar](data:image/svg+xml;utf8,<svg xmlns='http://www.w3.org/2000/svg' viewBox='0 0 50 50'><circle class='avatar-circle-default' fill='%23759d7b' cx='25px' cy='25px' r='20px'></circle><text class='avatar-text-default' x='49%' y='53%' fill='white' text-anchor='middle' alignment-baseline='middle'>"</text></svg>)
that ruf wheel is the same as the raid/atwie 340mm that i got in blk/alum ( that one is just ruf badged ) and along with the 997ssk is infinitely better than stock. the stock wheel is about as cumbersome as the oem shifter lol.
agree with anyone that living with the stock shifter is crazy. but would add the steering wheel into that assessment
agree with anyone that living with the stock shifter is crazy. but would add the steering wheel into that assessment
12-13-2014, 01:06 PM
#1091
Rennlist Member
12-13-2014, 01:27 PM
#1092
12-13-2014, 01:40 PM
#1093
Nordschleife Master
Thread Starter
12-13-2014, 01:52 PM
#1094
Nordschleife Master
Thread Starter
If anyone knows of a place that is selling a nice thick steering wheel which uses the airbag cover from the old one and/or perhaps can match metropol blue on the steering wheel,please let me know. I can take mine off and send it...no rush on return...2-3 weeks is fine.
Thanks.
Thanks.