When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Did you have the alignment done with the worn tires on the car?
Yes. The tires began to show wear but the technician said he could still align the car and showed me the print out that it was all in spec.
These Dunlop's too are used so I will see if he can check it again or wait till I can get new tires.
Yes. The tires began to show wear but the technician said he could still align the car and showed me the print out that it was all in spec.
These Dunlop's too are used so I will see if he can check it again or wait till I can get new tires.
Changing tires can effect the alignment, sometimes severely. But usually not to the extent of changing the steering wheel centering. Are you sure all the wheels are tightened flush with the hubs?
And yes, wait for new tires before having the alignment redone.
what's sad is that i didn't even put my weight onto it... i'm trying to remove the O2 sensors with the exhaust off the car... i heated the bung and put the wrench on.. left hand held the exhaust down, right hand on the wrench and snap... the wrench sheared downwards but i had eye protection on... i give up trying to extract these sensors for the new exhaust... i just ordered new ones...
05-10-2020, 02:02 PM
As long as it runs without missing...
