Cuda911

Another option, spend a mere $8K for a new Fabspeed exhaust, and get a hose and cap FREE!!

.

Chris@Fabspeed

Cuda 911, you don't have a cap - the part you have actually removes the resonance chamber and adds usable volume to the airbox. The Orange cap mod does not have the ability to do this.

lingpoen

CJ fr LA & ALPIN0003 & PFBZ....what is the line going to the top of my air box housing tube, the part that would be replaced by the black silicone hose? I like your set ups & would like to try it, however what do I do with this emission maybe hose thingy? Maybe air sensor? Did u guys have this & what did u do, or does it do?

thanks as always

m

CJWessing

Not sure what that is. What year is your car? Is it a special edition?

MiamiC70

A breather picked up a local auto parts.

Imo000

Breather = Air filter.

CJWessing

Still not sure what this tube does or where it goes. I don't have one on my 2002 targa.

lingpoen

2003 4CS TIP. Does anyone out there know what the tube is for? Nice idea to put an air filter on the end of it....I think-

m

MiamiC70

I have x51 and on x51 or Tip you have that hose you need to go to auto parts buy a crank case breather and stick it on end of hose like my picture and you are good to go.

speed rII

I did this mod today to my car. I was little skeptic about the result's before, but this mod really changes the intake note. Had a stupid grin on my face after the first over 4k rpm wot pull

I did my own plug that eliminates the chamber from the airbox, but uses the stock intake pipe for stock look. Nothing need's to be modified, just plug and play..

thirteeneast

[IMG][/IMG]

Take it back down to the airbox then its still filtered and theres no need to add a filter to the end of the pipe.

lingpoen

clever, did u cut a hole in a cap, or buy a 1.5 inch thingy that clamped the line? a closer pic would be great & thanks-

m

speed rII

Here's couple pic's from my mod. Plug and play, and easy to go back to stock...

alpine003

Wow 9 pages dedicated to making some noise...

Think I'll try to modify my card holder on my bicycle spokes to be louder too.

MiamiC70

What is the benefit of removing the resonator vs. just capping / bypassing it?