Aerokit Front Bumper options
#46
Rennlist Member
#47
Rennlist Member
Definitely a fair price from Rose Passion. I also waited almost a year but sourced all OEM aero parts for my 996.1. Only (1) part I had to source from Porsche directly (brand new) was the drivers side, side skirt. Couldn’t seem to find a used one in good condition anywhere! It was well worth the wait sourcing everything oem in my opinion, fitment and finish were excellent and an easy retrofit.
#48
#49
Rennlist Member
Ruffy if you have an aero 996.1 front bumper and do buy a new one lmk if you want to sell your old one
Mike
Mike
#50
Rennlist Member
Can someone in this thread who has done the swap tell me if all these parts listed are required for smoothest installation?
Thanks!
Thanks!
#51
Rennlist Member
This is the list for a 996.1 aero front, correct? Don’t know why the list has so many sheet metal screws. All the important pieces from GT3 PET are there. Most everything other than expansion rivets and bumper cover/spoiler lip, transfer from your regular cover. You also need some 3M tape for the lip.
#52
Rennlist Member
@hatchetf15 Yes, this came from the 996 "Installing Cup Aerokit" pdf. And I think I am going to hold off on the front lip initially.
Thanks for the heads up!
Thanks for the heads up!
#53
RL Community Team
Rennlist Member
Rennlist Member
I’d skip the expanding rivets and use bolts/nuts. That’s how I damaged one of my 996.2 aerokit lips.
I now run the Cup car lip.
It’s more flexible.
Porsche has discontinued them, but Demon Speed is making them now.
I now run the Cup car lip.
It’s more flexible.
Porsche has discontinued them, but Demon Speed is making them now.
#54
Rennlist Member
#55
Rennlist Member
I just bought the GT3 front splitter about a month ago. I do know that they had quite a bit of demand for both the GT3 and Cup splitter. They were very accessible by phone and email to answer questions.
The following users liked this post:
Corso (12-05-2021)
#56
RL Community Team
Rennlist Member
Rennlist Member
https://rennlist.com/forums/porsche-...l#post17824614
Should be shipping out soon.
I already have a used spare, so soon I‘ll have two spares.
The following users liked this post:
Corso (12-05-2021)
#57
Rennlist Member
Anyone have info or tips on grille's for the Aerokit bumper? Seen some people self-fab them...
#58
RL Community Team
Rennlist Member
Rennlist Member
#59
Rennlist Member
Thread Starter
Does the aerokit bumper need an air inlet on the inside?
This part:
https://www.pelicanparts.com/More_In...4-01C-OEM#tab1
This part:
https://www.pelicanparts.com/More_In...4-01C-OEM#tab1