What did you do to your 996 today?
#1007
Replaced my headlight bulbs with led ones, (Autofather off eBay) like the white light compared to the yellow, I think the yellow dates the car, quite easy to do apart from getting the headlamp clips around the bigger bulb unit! The one on the left is new right is the old one!
#1008
Drifting
Replaced my headlight bulbs with led ones, (Autofather off eBay) like the white light compared to the yellow, I think the yellow dates the car, quite easy to do apart from getting the headlamp clips around the bigger bulb unit! The one on the left is new right is the old one!Attachment 1299779
#1009
I don't know how the color compares with the LED, but I put in Sylvania Silver Star Halogen bulbs a few years ago and the brightness and visibility improvement was dramatic over regular halogens.
#1010
RL Community Team
Rennlist Member
Rennlist Member
Since I haven't fixed my wrist pin tool using Jake's method(plan to do that this weekend) I decided I'd play with my camshaft timing tools.
Here's my engine after I got done playing:
Still looking for an old crankshaft and IMS (plus the bearing) if anyone has one they want to get rid of.
They can be shot, they just need to turn so I can edumacate myself.
Here's my engine after I got done playing:
Still looking for an old crankshaft and IMS (plus the bearing) if anyone has one they want to get rid of.
They can be shot, they just need to turn so I can edumacate myself.
#1011
Originally Posted by cds72911
noz1974, they look great. Do they help much with additional usable lighting? Some people claim that LEDs in halogen reflectors create too much scatter. I’d like to get more usable light out of my (base halogen) setup without investing in litronics, so am eager to hear. Thanks!
#1012
Rennlist Member
Since I haven't fixed my wrist pin tool using Jake's method(plan to do that this weekend) I decided I'd play with my camshaft timing tools.
Here's my engine after I got done playing:
Still looking for an old crankshaft and IMS (plus the bearing) if anyone has one they want to get rid of.
They can be shot, they just need to turn so I can edumacate myself.
Here's my engine after I got done playing:
Still looking for an old crankshaft and IMS (plus the bearing) if anyone has one they want to get rid of.
They can be shot, they just need to turn so I can edumacate myself.
#1013
Rennlist Member
Fired her up and went to work.
#1014
Rennlist Member
#1015
Repaired my driver's side tilt latch. Spent about two hours trying to repair the cable from the bottom before taking the leather cover and padding off. Super simple to repair after that and fairly quick reassembly. Improved the cable stop at the top and now works better than when I bought it and feels like new!
#1016
RL Community Team
Rennlist Member
Rennlist Member
I really envy your determination and educational fortitude, thanks for sharing. I have the replacement IMS bearing out of my car after the IMSS was installed. The mechanic said it needed to be replaced (grinding a little), but Charles said that was impossible to know when it was in the car. I can take pictures to make sure it will help you...
@Ratchet1025, thanks!
That would be great.
Today I was off work, so I took my 996 for a drive.
I drove it hard!
I accidentally drove past a local unmarked police car going faster than I should have on a twisty road.
He pulled up next to me and gave me a thumbs up.
#1017
Rennlist Member
@Ratchet1025, thanks!
That would be great.
Today I was off work, so I took my 996 for a drive.
I drove it hard!
I accidentally drove past a local unmarked police car going faster than I should have on a twisty road.
He pulled up next to me and gave me a thumbs up.
#1018
Rennlist Member