What did you do to your 996 today?
#8656
4th Gear
Join Date: Jul 2022
Location: North Royalton, Ohio
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
I deleted the headlight washers which were broke.
1999 Porsche 911 Carrera, 6-sp, 53,000 miles, previously updated air box with K&N drop-in air filter, and HPC silicon air tube. Next fix broken center console cover, then air vent blowing foam.
1999 Porsche 911 Carrera, 6-sp, 53,000 miles, previously updated air box with K&N drop-in air filter, and HPC silicon air tube. Next fix broken center console cover, then air vent blowing foam.
#8657
Three Wheelin'
Dug my car out of the garage yesterday and took it for the first drive since November or so. Just ordered an oil change kit so I will be doing that shortly. Always impressed by how well the Porsche drives after not driving it for a while. For a 20+-year-old car, it's held up remarkably well compared to other cars I've driven.
The following 4 users liked this post by motoo344:
#8658
Rennlist Member
Fister mufflers installed (sounds so good) but the exhaust tips were not properly aligned by the shop. When I brought it back they told me they couldn't be adjusted blah blah… They just didn't want to deal with the rusted hardware etc. I decided to take care of the hardware in the tips, drilling out and replacing, and then ceramic coating the black centers. Turned out really good I think and the tips are now finally aligned properly
The following users liked this post:
sasilverbullet (03-24-2023)
The following 3 users liked this post by second2none:
#8661
#8662
Rennlist Member
Last week my 996.1 got treated to an oil change and bore scope through the sump. New sump baffle, oil and filter back together. Clean cylinder walls except a tiny wear air on cyl 6 floor as I guess to be expected.
This week she's got new top mounts, bearings etc on the front. Next week, OEM reservoir, pump, low temp Thermo and some new hardware and hoses. Then after Easter I'm heading on a 3k mile road trip. Someone suggested I rent a car for the trip, 'you don't want to do that in an old 911'. Rubbish. I'm not investing in the girl to leave her at home. Jeez... Some people don't get it I guess. I'll take some road photos.
This week she's got new top mounts, bearings etc on the front. Next week, OEM reservoir, pump, low temp Thermo and some new hardware and hoses. Then after Easter I'm heading on a 3k mile road trip. Someone suggested I rent a car for the trip, 'you don't want to do that in an old 911'. Rubbish. I'm not investing in the girl to leave her at home. Jeez... Some people don't get it I guess. I'll take some road photos.
#8663
Racer
Last week my 996.1 got treated to an oil change and bore scope through the sump. New sump baffle, oil and filter back together. Clean cylinder walls except a tiny wear air on cyl 6 floor as I guess to be expected.
This week she's got new top mounts, bearings etc on the front. Next week, OEM reservoir, pump, low temp Thermo and some new hardware and hoses. Then after Easter I'm heading on a 3k mile road trip. Someone suggested I rent a car for the trip, 'you don't want to do that in an old 911'. Rubbish. I'm not investing in the girl to leave her at home. Jeez... Some people don't get it I guess. I'll take some road photos.
This week she's got new top mounts, bearings etc on the front. Next week, OEM reservoir, pump, low temp Thermo and some new hardware and hoses. Then after Easter I'm heading on a 3k mile road trip. Someone suggested I rent a car for the trip, 'you don't want to do that in an old 911'. Rubbish. I'm not investing in the girl to leave her at home. Jeez... Some people don't get it I guess. I'll take some road photos.
The following 2 users liked this post by hkovalcik:
damage98MO (03-23-2023),
second2none (03-23-2023)
#8664
Rennlist Member
Not sure if you're heading west, but I too am heading on a big trip. Leaving from Bluffton, SC to head to my new home in Hermosa Beach, CA. Plan is to leave this Sunday night and get there by next weekend. Going to spend a day or two in Phoenix/Scottsdale when I get there. I'll be going the "southern route" through Houston and the like. If you see an Arena Red with ambers and a Pennsylvania tag give me a wave!!!
#8665
Racer
That's a good trek. I've driven West to East and East to West a few times but this one is from NC to NS Canada and back after a few weeks. First real long road trip in this car. I've got my toll pass, but no radar yet. Not sure if it's worth the $. And it's so confusing with all the choices...
You might want to look into Waze if you haven’t already. It’s a maps app where people report all sorts of stuff along your route - cops included and it’s usually pretty accurate.
then again ~95mph for me hovers around 4k - I like to keep it in the 3.2 range around 85 or so
The following users liked this post:
damage98MO (03-24-2023)
#8666
I mounted the subwoofer box I made using mounts I drew up in Solidworks. The box doesn’t have single 90 degree bend which made mounting it tricky. I tied into the rear seat latch studs and 3D printed washers that are angled to match the offset. Twin 8” Memphis subs are perfect for such a small cabin!
The following 2 users liked this post by gtxracer:
damage98MO (03-26-2023),
golock911 (03-26-2023)
#8667
Three Wheelin'
I dig the speakers
I mounted the subwoofer box I made using mounts I drew up in Solidworks. The box doesn’t have single 90 degree bend which made mounting it tricky. I tied into the rear seat latch studs and 3D printed washers that are angled to match the offset. Twin 8” Memphis subs are perfect for such a small cabin!
#8668
Rennlist Member
Don’t be sound prejudice!!!
my old setup was more intense took it out and put in a slim line single box
but all music should be enjoyed as the owner likes
my old setup was more intense took it out and put in a slim line single box
but all music should be enjoyed as the owner likes
The following 5 users liked this post by EVOMMM:
binaryaudax (03-26-2023),
eltristo (03-26-2023),
gnargusto (04-02-2023),
gtxracer (03-26-2023),
JohnCA58 (03-26-2023)
#8669
Rennlist Member
I mounted the subwoofer box I made using mounts I drew up in Solidworks. The box doesn’t have single 90 degree bend which made mounting it tricky. I tied into the rear seat latch studs and 3D printed washers that are angled to match the offset. Twin 8” Memphis subs are perfect for such a small cabin!
The following users liked this post:
gtxracer (03-26-2023)
#8670
Rennlist Member
Met about 200 fellow enthusiasts at Ray Catena Porsche NJ
The following 3 users liked this post by EVOMMM: