Notices
996 Forum 1999-2005
Sponsored by:

What did you do to your 996 today?

Thread Tools
 
Search this Thread
 
Old 02-21-2023, 07:50 PM
  #8536  
playswithcars
Rennlist Member
 
playswithcars's Avatar
 
Join Date: May 2021
Location: Denver, CO
Posts: 171
Received 148 Likes on 64 Posts
Default

Retrofitted my 3rd brake lights with a red halo strip to match the taillights. So bright!!

The following 2 users liked this post by playswithcars:
damage98MO (02-23-2023), EVOMMM (02-21-2023)
Old 02-21-2023, 11:09 PM
  #8537  
bbui12
8th Gear
 
bbui12's Avatar
 
Join Date: Mar 2022
Location: Houston, TX
Posts: 8
Likes: 0
Received 14 Likes on 4 Posts
Default

Originally Posted by damage98MO
@EVOMMM I had the bumper off and cleaned them last spring. it's been a year but I've only put 3k miles on since. For maybe half of those I had the grills in. So I'm assuming they're clean. I'm going to put them on again.
​​​

I haven't noticed an increase in engine temps for me since I installed the grill but good to know, I'll definitely pay attention to it more to see if anything changes.

Last edited by bbui12; 02-21-2023 at 11:11 PM.
The following users liked this post:
damage98MO (02-23-2023)
Old 02-22-2023, 09:24 PM
  #8538  
sasilverbullet
Rennlist Member
 
sasilverbullet's Avatar
 
Join Date: Aug 2002
Location: San Antonio, Texas
Posts: 3,302
Received 784 Likes on 410 Posts
Default

Originally Posted by bbui12
​​​

I haven't noticed an increase in engine temps for me since I installed the grill but good to know, I'll definitely pay attention to it more to see if anything changes.
I've had mine on for over a year here in south Texas, driving in traffic, temps over 106, never any issue.

If I'm not mistaken the problem is if your going over 135, that's when the mesh and air flow start getting wonky.

In the meantime, I'd rather have the protection. My grills stopped an over 1.5 inch rock from going in, I had to replace the grill because it was so bent, but it kept the rock from hitting the A/C condenser.
The following 2 users liked this post by sasilverbullet:
damage98MO (02-23-2023), Porschetech3 (02-25-2023)
Old 02-22-2023, 11:17 PM
  #8539  
Leeroy89
Rennlist Member
 
Leeroy89's Avatar
 
Join Date: Nov 2020
Posts: 293
Received 155 Likes on 83 Posts
Default

I got to dig mine out twice in one day… contractors are working in my garage so I had to leave it out in the snow like a common jalopy.



The following 3 users liked this post by Leeroy89:
damage98MO (02-23-2023), EVOMMM (02-23-2023), JMELZER (02-23-2023)
Old 02-24-2023, 06:04 PM
  #8540  
996C438
Rennlist Member
 
996C438's Avatar
 
Join Date: Jan 2022
Location: Dahlonega , Georgia
Posts: 851
Likes: 0
Received 650 Likes on 294 Posts
Default

My 996 trunk and engine bay light were both out . Swapped a bulb from my Boxster into both and they worked . But as we all know they get blistering hot 😡 . Ordered four LED bulbs from Amazon and installed them in both cars . Nice bright white and cool to the touch . Best part four bulbs delivered to my door for less than 8 bucks ! They even have little heat sinks on them .
The following users liked this post:
Willys 47 (02-24-2023)
Old 02-24-2023, 06:29 PM
  #8541  
Willys 47
Instructor
 
Willys 47's Avatar
 
Join Date: Dec 2021
Location: Illinois
Posts: 125
Received 146 Likes on 61 Posts
Thumbs up

Originally Posted by 996C438
My 996 trunk and engine bay light were both out . Swapped a bulb from my Boxster into both and they worked . But as we all know they get blistering hot 😡 . Ordered four LED bulbs from Amazon and installed them in both cars . Nice bright white and cool to the touch . Best part four bulbs delivered to my door for less than 8 bucks ! They even have little heat sinks on them .
nice; pls
post a pic of what you ordered
Old 02-24-2023, 07:15 PM
  #8542  
996C438
Rennlist Member
 
996C438's Avatar
 
Join Date: Jan 2022
Location: Dahlonega , Georgia
Posts: 851
Likes: 0
Received 650 Likes on 294 Posts
Default

Originally Posted by ****** 47
nice; pls
post a pic of what you ordered
Amazon Amazon

These are what I ordered .
The following users liked this post:
James_03C4S (02-24-2023)
Old 02-24-2023, 07:34 PM
  #8543  
SoCal911t
Rennlist Member
 
SoCal911t's Avatar
 
Join Date: Apr 2005
Location: Sandy Eggo
Posts: 1,988
Likes: 0
Received 1,458 Likes on 705 Posts
Default

Originally Posted by Leeroy89
I got to dig mine out twice in one day… contractors are working in my garage so I had to leave it out in the snow like a common jalopy.
I feel your pain. We had some hail back in 2008.






Originally Posted by ****** 47
nice; pls post a pic of what you ordered
I did the LED swap but used bulbs a little different from the ones 996C438 used. Very bright.
https://www.amazon.com/gp/product/B088YP5HQC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 https://www.amazon.com/gp/product/B088YP5HQC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1





Old 02-24-2023, 07:41 PM
  #8544  
jdbornem
Pro
 
jdbornem's Avatar
 
Join Date: Dec 2018
Posts: 617
Received 493 Likes on 253 Posts
Default

Originally Posted by 996C438
My 996 trunk and engine bay light were both out . Swapped a bulb from my Boxster into both and they worked . But as we all know they get blistering hot 😡 . Ordered four LED bulbs from Amazon and installed them in both cars . Nice bright white and cool to the touch . Best part four bulbs delivered to my door for less than 8 bucks ! They even have little heat sinks on them .
Originally Posted by ****** 47
nice; pls
post a pic of what you ordered
I posted detailed descriptions of my own bulb replacements. I even measured power draws.
https://rennlist.com/forums/996-foru...ed-lights.html
The following 3 users liked this post by jdbornem:
EVOMMM (02-24-2023), peterp (02-24-2023), Willys 47 (02-25-2023)
Old 02-25-2023, 11:11 AM
  #8545  
wyovino
Rennlist Member
 
wyovino's Avatar
 
Join Date: Jun 2010
Posts: 3,532
Received 618 Likes on 333 Posts
Default

I added a license plate frame WiFi backup camera. It's well made and the kit is very complete. The camera covers 170 degrees but doesn't give me the view I had hoped for - possibly because the license plate area is recessed. I find backing out of parking spaces from between SUVs to be challenging since many people think that parking lots are racetracks. The camera on my wife's Subaru Forester shows cars coming from both directions and that's what I was hoping for with this one.
The following users liked this post:
EVOMMM (02-25-2023)
Old 02-25-2023, 03:36 PM
  #8546  
DSC800
Rennlist Member
 
DSC800's Avatar
 
Join Date: Jan 2020
Location: San Diego
Posts: 242
Received 92 Likes on 67 Posts
Default Headlight Switch Replaced

Replaced my headlight switch. Was having to jiggle it and it was still flickering. The TRQ brand was $55 on Amazon vs $155 for Porsche part. Very easy to do thanks to youtuber's vids, only about 20 min. Have heard of the dealer charging ~$400. Screws are a T20.




The following 3 users liked this post by DSC800:
peterp (02-25-2023), playswithcars (02-25-2023), wyovino (02-25-2023)
Old 02-25-2023, 04:57 PM
  #8547  
996C438
Rennlist Member
 
996C438's Avatar
 
Join Date: Jan 2022
Location: Dahlonega , Georgia
Posts: 851
Likes: 0
Received 650 Likes on 294 Posts
Default

Installed a Function First metal shift **** and a aftermarket black leather shift boot with red stitching . I am slowly going to add some red touches to break down the sea of grey . The shift boot was made by KBH and purchased off Amazon . Nice fit/feel and made in the US . I am happy with both mods .
The following users liked this post:
playswithcars (02-25-2023)
Old 02-26-2023, 09:10 AM
  #8548  
RennPart
Basic Sponsor
Rennlist
Site Sponsor

 
RennPart's Avatar
 
Join Date: Nov 2016
Location: Alton, VA and Bethania, NC
Posts: 958
Received 339 Likes on 148 Posts
Default

Found this gem 01 PTS Ocean Blue Metallic C4 with sport seats last week at a local Honda dealer! 75k miles.

I was very happy when I put it up on jacks and pulled the wheels off to find about $4k worth of Tarett, elephant, and Rennline suspension.

Nice to have another 996 after at least 15 something Boxsters.

What a relief it will be to be able to put my seat back far enough to be comfortable on longer trips.

This one needed "the worx." All easy stuff. Luckily had IMS and Clutch done last year at Porsche, glad I didn't have to pay that one (or do it myself).

The list:
1. replaced broken cupholders (01 style)
2. replaced pas. window regulator
3. sent out dash to have pixels repaired
4. replaced oil pressure switch
5. replaced both side door locks (no window drop)
6. ordered missing rear seat backs (still working on obtaining the hardware)
7. replace windshield cowl
8. replace rear tires (they were 9 years old, fronts new).
9. bleed brakes and clutch
10. order windshield gaskets- windshield will have to come out to fix the right way
11. proper alignment, car handles like a truck with 0 degrees front negative camber
12. mod the mufflers for moar noise.
13. fix roof "rail" gasket on pas. side.
14. Install our "RS" engine mount upgrade.
15. Install new version of Rennline phone mount.
16. Clean all the old wheel tape off inside of wheels.
17. Put cubby where CD holder was.

I have about half of the above work done, ironically I'm waiting on parts! Can't wait to drive.







L999 = PTS, although I understand Ocean Blue Metallic was a standard color in 99-00.
__________________


rennpart.com | Phone: 336-793-2134 |Email: ace@rennpart.com

Instagram | Facebook

Last edited by RennPart; 02-26-2023 at 09:26 AM.
The following 7 users liked this post by RennPart:
AdamB996 (02-28-2023), maekwl (02-27-2023), peterp (02-26-2023), SSDVC (02-26-2023), TexSquirrel (02-27-2023), Tom Loder (02-26-2023), wdb (02-26-2023) and 2 others liked this post. (Show less...)
Old 02-26-2023, 09:43 AM
  #8549  
bmchan
Racer
 
bmchan's Avatar
 
Join Date: Mar 2021
Location: Central MA
Posts: 403
Received 161 Likes on 111 Posts
Default

Originally Posted by DSC800
Replaced my headlight switch. Was having to jiggle it and it was still flickering. The TRQ brand was $55 on Amazon vs $155 for Porsche part. Very easy to do thanks to youtuber's vids, only about 20 min. Have heard of the dealer charging ~$400. Screws are a T20.
Any chance you have a link for that switch at Amazon? Not finding it.
Old 02-26-2023, 10:53 AM
  #8550  
e30rapidic
Rennlist Member
 
e30rapidic's Avatar
 
Join Date: Mar 2017
Location: Raleigh, North Carolina
Posts: 762
Received 528 Likes on 274 Posts
Default

Originally Posted by RennPart
6. ordered missing rear seat backs (still working on obtaining the hardware)
I might be able to help out here, I think I still have everything (the covers are black plastic though). Let me check....

Found them, located in NC if interested. @RennPart



Last edited by e30rapidic; 02-26-2023 at 11:32 AM.
The following users liked this post:
RennPart (02-26-2023)


Quick Reply: What did you do to your 996 today?



All times are GMT -3. The time now is 05:33 PM.