What did you do with your 993 today
#4261
Pro
#4262
Racer
#4263
#4264
Rennlist Member
75 yesterday, but if it makes you feel any better I’m on my way to Fairbanks today for a couple days of business, where it’s -30. Where’s my Dakar rental??
The following users liked this post:
RockstarBruski (03-01-2024)
#4265
Rennlist Member
Wanted to thanks folks for recommending Xylene for cleaning up undercarriage. Respirator and good ventilation needed, and it will remove cosmoline. But it's quick and doesn't take much.
I'm revamping my suspension and wanted to clean up the wheel wells. This took less than 15 minutes.
Before:
After:
I'm revamping my suspension and wanted to clean up the wheel wells. This took less than 15 minutes.
Before:
After:
The following 6 users liked this post by dalves11:
996scott (03-04-2024),
boomboomthump (03-03-2024),
INTMD8 (03-06-2024),
LimeyBoy (03-03-2024),
RS-Freak (03-03-2024),
and 1 others liked this post.
#4266
Interesting. Did you also use it on the wheel well liners? Looks great.
#4267
Rennlist Member
Wanted to thanks folks for recommending Xylene for cleaning up undercarriage. Respirator and good ventilation needed, and it will remove cosmoline. But it's quick and doesn't take much.
I'm revamping my suspension and wanted to clean up the wheel wells. This took less than 15 minutes.
I'm revamping my suspension and wanted to clean up the wheel wells. This took less than 15 minutes.
#4268
Rennlist Member
#4269
I had a little fun with my rear grille and added the narrow body Turbo S front splitter. WERKS Reunion in Amelia was fun too... despite the rain.
Last edited by Damian0380; 03-04-2024 at 01:36 PM.
The following 2 users liked this post by Damian0380:
alsamrob4 (03-04-2024),
RockstarBruski (03-04-2024)
#4270
Racer
(examples of Turbo S splitter below)
Any more pics you can share of your version @Damian0380? along with supplier details, would be helpful. Not seen that design before!
Last edited by ch3tman; 03-04-2024 at 07:09 PM.
The following users liked this post:
Damian0380 (03-05-2024)
#4271
Rennlist Member
#4272
Thank you! It was a DIY...it was time to replace/refinish the grille, as it faded badly. I decided to mod it by taking out three of the louvers, sandwiched a honeycomb aluminum mesh between the grille and spoiler, and added a vintage 911 badge. I am going to adjust the dimensions slightly for the next one.
#4273
Front Lip on NB
Chet,
Hope all is well.
It was expensive...$1300 USD, but that included $250 for freight. I ended buying it through Scuderia Parts (UK) as they were able to reduce the cost some. I was originally going to do an entire Turbo bumber...but ended up seeing too many NBs with that mod. The photo you have of the blue 993 has a slightly different center lip detail...Mine is continuous with not notch per se. Here are the pics i do have handy...even one before it was painted. I can get you more later.
Regards
Damian P
Hope all is well.
It was expensive...$1300 USD, but that included $250 for freight. I ended buying it through Scuderia Parts (UK) as they were able to reduce the cost some. I was originally going to do an entire Turbo bumber...but ended up seeing too many NBs with that mod. The photo you have of the blue 993 has a slightly different center lip detail...Mine is continuous with not notch per se. Here are the pics i do have handy...even one before it was painted. I can get you more later.
Regards
Damian P
#4274
Racer
It was expensive...$1300 USD, but that included $250 for freight. I ended buying it through Scuderia Parts (UK) as they were able to reduce the cost some. I was originally going to do an entire Turbo bumber...but ended up seeing too many NBs with that mod. The photo you have of the blue 993 has a slightly different center lip detail...Mine is continuous with not notch per se. Here are the pics i do have handy...even one before it was painted. I can get you more later.
Regards
Damian P
Regards
Damian P
also seen on this black car:
EDIT: There was some prior discussion (started by @kkell3232 ) on this splitter before, here: https://rennlist.com/forums/993-foru...onnection.html
Yes please that would be very helpful. Thanks in advance .
Last edited by ch3tman; 03-05-2024 at 10:13 AM.
#4275
Racer
If/when you have a chance for more photos (please), it would be good to see: (1) whether it is as prominent as the 968 version which does 'stick out' quite a bit and (2) whether the fixings are on the two front corners only, or if there is a central fixing point which holds it together and in place too, and also (3) how tightly it sits against the PU bumper (any gaps? or snug). Goes without saying, the more pics the better! Thanks in advance.