Notices
993 Forum 1995-1998
Sponsored by:
Sponsored by:

993 RS Steering Wheel Installed - wiring photos

Thread Tools
 
Search this Thread
 
Old 01-15-2024 | 06:18 PM
  #166  
Patinamisfit's Avatar
Patinamisfit
3rd Gear
 
Joined: Apr 2023
Posts: 3
Likes: 0
Default 964 shroud

Hello

Great thread

I wondered if any one would know if the 964 shroud would fit and thus fill the gap on a 996/986 steering column and described it helping on a 993.
Thanks
Old 01-15-2024 | 06:53 PM
  #167  
71-3.0-911's Avatar
71-3.0-911
Rennlist Member
 
Joined: Mar 2005
Posts: 2,516
Likes: 776
Default

The 964 column will likely not work due to the substantial difference between the dash and columns. One could always purchase and try. If it doesn't fit, return it? Very little transfers between air and water cooled cars besides some of the rims/wheel combos.
Old 01-16-2024 | 03:15 AM
  #168  
Patinamisfit's Avatar
Patinamisfit
3rd Gear
 
Joined: Apr 2023
Posts: 3
Likes: 0
Default

Thanks for reply. I've found though that a lot of the parts on the 996/986 platform do have 993/964 parts, the std 4 spoke steering wheel is 993, a lot of the hand brake mechanism is 964. The clock switch, airbag plugs etc are the same as 993 etc. Just wondered if anyone knew before I brought one , took my car apart to find it didn't fit. To see if it's better with a Momo wheel or fitting a 964 part is a backwards step.
thanks.
Old 01-16-2024 | 06:08 AM
  #169  
TakeFour's Avatar
TakeFour
Rennlist Member
 
Joined: May 2023
Posts: 288
Likes: 66
From: London, England
Default

Why not ask the 996 guys what they are doing?
Old 01-16-2024 | 06:14 AM
  #170  
Patinamisfit's Avatar
Patinamisfit
3rd Gear
 
Joined: Apr 2023
Posts: 3
Likes: 0
Default

Sorry yes I'll go back to the water cooled side of the forum.
Old 01-21-2024 | 07:22 PM
  #171  
SGOGT4's Avatar
SGOGT4
Rennlist Member
 
Joined: Aug 2001
Posts: 1,412
Likes: 117
From: Danville CA
Default

Just working to compile my parts to do a non-airbag conversion. Couple of Qs on the resistor, what’s the difference between 1/2W and 1/4W and which do I want/need?

struggling to find 2.8ohms looks like some use 3 ohms what’s the right guidance here and any suggested sources?
Old 02-26-2024 | 10:02 PM
  #172  
Goose 993's Avatar
Goose 993
Rennlist Member
 
Joined: Oct 2020
Posts: 699
Likes: 252
From: Oceanside, CA
Default

Would this work in place of cutting up a 996/986 clockspring? Ebay item


Old 02-26-2024 | 10:39 PM
  #173  
SGOGT4's Avatar
SGOGT4
Rennlist Member
 
Joined: Aug 2001
Posts: 1,412
Likes: 117
From: Danville CA
Default

Answering my own question now that my install is done, Used a .5 W 3 ohm resistor and had no problem.


Originally Posted by SGOGT4
Just working to compile my parts to do a non-airbag conversion. Couple of Qs on the resistor, what’s the difference between 1/2W and 1/4W and which do I want/need?

struggling to find 2.8ohms looks like some use 3 ohms what’s the right guidance here and any suggested sources?
Old 04-24-2024 | 10:06 AM
  #174  
VladiD's Avatar
VladiD
Rennlist Member
 
Joined: Mar 2021
Posts: 166
Likes: 85
From: South FL
Default

so I was trying to order the connector pin for pin 71 in order to get a horn to work with my new Momo wheel, but Pelican says that they have no place to source the 999-652-639-22-OEM

Any idea what an equivalent, non-Porsche part would be from a company like Mouser?
Old 04-24-2024 | 10:58 AM
  #175  
71-3.0-911's Avatar
71-3.0-911
Rennlist Member
 
Joined: Mar 2005
Posts: 2,516
Likes: 776
Default

Just leave off the OEM suffix on the part number. Looks to still be readily available.

https://porsche.oempartsonline.com/o...ve-99965263922
The following users liked this post:
VladiD (04-24-2024)
Old 04-24-2024 | 12:20 PM
  #176  
VladiD's Avatar
VladiD
Rennlist Member
 
Joined: Mar 2021
Posts: 166
Likes: 85
From: South FL
Default

Originally Posted by 71-3.0-911
Just leave off the OEM suffix on the part number. Looks to still be readily available.

https://porsche.oempartsonline.com/o...ve-99965263922
Thank you!
Old 04-24-2024 | 12:23 PM
  #177  
71-3.0-911's Avatar
71-3.0-911
Rennlist Member
 
Joined: Mar 2005
Posts: 2,516
Likes: 776
Default

Also, I may have some of these just sitting around. I'll dig through my bins to see what I can find. If I remember correctly, I had to order like 5 of them but only used the 1.
Old 04-24-2024 | 12:24 PM
  #178  
Cupcar's Avatar
Cupcar
Rennlist Member
 
Joined: Jun 2001
Posts: 3,693
Likes: 100
From: California Boardwalk, Skanderborg Denmark
Default

$!.34 at Delaware Porsche https://www.delawareporscheparts.com...ve-99965263922
Old 04-24-2024 | 12:38 PM
  #179  
VladiD's Avatar
VladiD
Rennlist Member
 
Joined: Mar 2021
Posts: 166
Likes: 85
From: South FL
Default

Originally Posted by 71-3.0-911
Also, I may have some of these just sitting around. I'll dig through my bins to see what I can find. If I remember correctly, I had to order like 5 of them but only used the 1.
I'd love it if you had an extra one. Of the two places I ordered from, both canceled the order due to the unavailability of the item and no ETA.
Old 04-24-2024 | 05:28 PM
  #180  
UserA's Avatar
UserA
Rennlist Member
 
Joined: Nov 2005
Posts: 2,855
Likes: 192
From: Charleston, SC
Default

I'm always shocked at how a thread like this pops up right when I need it! I literally open the box from Gert with my steering wheel, a horn thingy and a capacitor. I only knew what one of those things was for until reading this!


Quick Reply: 993 RS Steering Wheel Installed - wiring photos



All times are GMT -3. The time now is 09:53 PM.