Mounting Recaro's in a 993
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
Mounting Recaro's in a 993
Made some progress on the seat mounts
using;
Recaro SPG XL seats
BK R-9066 side mounts
Recaro flat sliders
RS tunnel side belt mounts
Another question,
all the harware is M8 1.25, I would like to use g12.9 but it is proving difficult to come by, is g10.9 or even 8.8 ok?
using;
Recaro SPG XL seats
BK R-9066 side mounts
Recaro flat sliders
RS tunnel side belt mounts
Another question,
all the harware is M8 1.25, I would like to use g12.9 but it is proving difficult to come by, is g10.9 or even 8.8 ok?
#5
Addict
Rennlist Member
Rennlist Member
Thread Starter
I suppose you can buy the Porsche pieces
993RS seat parts
964.521.819.01 x2 /L seat mount 279.70
964.521.820.01 x2 /R seat mount 256.37
964.521.065.00 x2 buckle support 18.19
964.803.183.00 x1 pass side tunnel belt buckle 172.85 S/S 000-043-207-24
964.803.183.01 x1 drivers side tunnel belt buckle 172.85 S/S 000-043-207-24
928.521.492.08 x2 seat rail /L inner 392.27
928.521.491.08 x2 seat rail /R inner 392.27
928.521.525.03 x2 connecting rog long, adj 5.54
N902.514.01 x4 clamping sleeve 0.29
N902.515.01 x4 guide bush 1.44
911.521.533.01 x2 handle 1.94
959.803.701.00 x1 bolt 5.61
N011.655.2 x2 washer 0.18
999.028.014.02 x2 spring washer 0.54
900.186.135.02 x12 M8x20 cheesehead bolt 0.43
999.093.010.07 x8 M8x20 hex head bolt 2.48
999.025231.03 x8 washer 8x27x3
#6
Addict
Rennlist Member
Rennlist Member
Thread Starter
#7
King of Cool
Rennlist Member
Rennlist Member
Trending Topics
#8
Bill, what is the part number for that thin headed bolt for the RS tunnel side belt mounts in your first picture? I didn't order one like that when I got mine and now I am guessing I should have.
#9
Addict
Rennlist Member
Rennlist Member
Thread Starter
M8-1.25x20 allen heads work perfectly for the side to slider mounts x16 is a tad short and x25 too long to allow full slider travel.
#10
Addict
Rennlist Member
Rennlist Member
Thread Starter
959.803.701.00
it' also the stock 993 bolt
#11
#12
When I did my recaros, I used the Brey-krause side mounts that included a belt mount. Only problem was that I needed a shim to tightly secure the seat belt receptacle. I guessing you're putting in
harness receivers instead.
harness receivers instead.
#13
King of Cool
Rennlist Member
Rennlist Member
Lowes & Home Depot is always worth the look if they're close by! I usually get stuff from the "allbolts" or what the hell that name is but local hardware store or Home Depot is close and they've rescued me few times.
#14
Addict
Rennlist Member
Rennlist Member
Thread Starter
Another piece of the puzzle, Rennline harness mounts for both the door and tunnel sides. A very impressive product and they supply all the hardware(this may seem like a minor deal but it's not) Kudus!!
#15
Burning Brakes
Bill,
Please keep updating. When I installed my SRD's and harnesses I made a million adjustments and custom parts and am still not happy. I did not use the Rennline items though. I would like ot be able to easily clip and unclip the harnesses. That means you need factory belts which left with the stock seats. So, I bought another set of rear receivers and mouted them on the tunnel too.
Please keep updating. When I installed my SRD's and harnesses I made a million adjustments and custom parts and am still not happy. I did not use the Rennline items though. I would like ot be able to easily clip and unclip the harnesses. That means you need factory belts which left with the stock seats. So, I bought another set of rear receivers and mouted them on the tunnel too.