992 Carrera OBD Flashing
#1201
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
On the valve issue, you might want to run a calibration via PIWIS on the actuators if you haven't already.
__________________
Flat 6 Motorsports
Porsche Aftermarket Specialists
www.flat6motorsports.com
Instagram / Facebook / YouTube
Flat 6 Motorsports
Porsche Aftermarket Specialists
www.flat6motorsports.com
Instagram / Facebook / YouTube
#1202
What is the gapping on the plugs out of the box?
I’m planning on installing a new set if plugs gapped down to .022 on plugs I got from suncoast part number 0PB 905 612
I checked the gap and they looked pretty tight already, they measured .028. It’s that normal?
I’m planning on installing a new set if plugs gapped down to .022 on plugs I got from suncoast part number 0PB 905 612
I checked the gap and they looked pretty tight already, they measured .028. It’s that normal?
#1203
The following users liked this post:
911Gr8tness (02-18-2023)
#1204
Platinum Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Correct, OEM gapping is .028".
.022" is the magic number and can also be run on bone-stock cars safely as well.
-Charles@M
.022" is the magic number and can also be run on bone-stock cars safely as well.
-Charles@M
The following 4 users liked this post by M Engineering:
911Gr8tness (02-20-2023),
dixonk (02-20-2023),
Love_Tacos_911 (11-28-2023),
tourenwagen (03-06-2023)
#1205
Platinum Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
We had a SUPER cool 992 Carrera 4 GTS stop by last week for an M-Tuner install at our shop in Pompano Beach. Gorgeous color red and an AWD model.
This was a Stage 1 car running 93 octane and our PSE valve mod. Hoping to have it on the dyno in the next few weeks and we can finally get some GTS marketing plots for you all.
M-Tuners are always in-stock and ready to ship from our South Florida location. If you mention it we can offer 5% off to Rennlist members.
-Charles@M
This was a Stage 1 car running 93 octane and our PSE valve mod. Hoping to have it on the dyno in the next few weeks and we can finally get some GTS marketing plots for you all.
M-Tuners are always in-stock and ready to ship from our South Florida location. If you mention it we can offer 5% off to Rennlist members.
-Charles@M
The following 3 users liked this post by M Engineering:
#1207
We had a SUPER cool 992 Carrera 4 GTS stop by last week for an M-Tuner install at our shop in Pompano Beach. Gorgeous color red and an AWD model.
This was a Stage 1 car running 93 octane and our PSE valve mod. Hoping to have it on the dyno in the next few weeks and we can finally get some GTS marketing plots for you all.
M-Tuners are always in-stock and ready to ship from our South Florida location. If you mention it we can offer 5% off to Rennlist members.
-Charles@M
This was a Stage 1 car running 93 octane and our PSE valve mod. Hoping to have it on the dyno in the next few weeks and we can finally get some GTS marketing plots for you all.
M-Tuners are always in-stock and ready to ship from our South Florida location. If you mention it we can offer 5% off to Rennlist members.
-Charles@M
In theory won't the GTS with stage 1 tune be the same as an S with the tune since it's the same motor and turbo? Also I wanted to ask, there's a lot of arguments about pros/cons of RAS. Is there anyway to program an on/off type setting for the RAS? Thanks.
#1208
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
We had an opportunity to compare the Stage 0 GTS Map to our Tuned 992 BaseGTS. It's a 992 Base model with the S/GTS Turbos, Soul Comp Link Pipes and BMC Air Filters. I just thought I'd share the results from our dyno runs.
#1209
Platinum Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Not at this time. You still have to remove the PDK2 module from the back. It honestly takes 15 or 20 minutes, it's not too bad.
Yes, the mechanical is the same. However, we still do not have graphs up yet for those wanting to see the power delta and curves. The power delta is going to be lower than an "S" model since it already starts with a spicier tune factory on the GTS.
Do you mean Rear Active Steering? We do not change that module.
-Charles@M
Do you mean Rear Active Steering? We do not change that module.
-Charles@M
The following users liked this post:
dixonk (03-06-2023)
#1210
#1211
Platinum Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
#1212
The following users liked this post:
tourenwagen (03-08-2023)
#1214
@M Engineering - I want to eliminate my cats, dealer wants to know if you would code out the CEL error that it will/might throw.
#1215
Rennlist Member
Ok I’ve ordered a whole jcr exhaust with sport cats. Now I need the tune. I have a 2021 c4s. Going to run 93 octane. Wondering if anyone with the m-tune is having any issues with pdk shifting in stock pdk tune. Not sure I wanna get the pdk tune. What does it do to the pdk that’s not happing with the stock file? Just don’t want to screw up the factory smoothness. Also do I differently need to change stock plugs. Car has 6000 miles.
thanks
thanks