polobai

Dust shields unbolt once you get the rotors off-just three bolts. I say ditch them.

AdamSanta85

My concern is extra heat on the $1000 each PDCC end links etc.

polobai

Wrap them in heat tape/heat reflective material

AdamSanta85

The rule of one thing leads to another lol.... same for speed/abs sensors too I imagine. Maybe I should check with the Turbo track guys, I believe all those cars have PDCC.

For those that aren't aware the PDCC endlink is this long hydraulic end link with a big rubber accordion boot that attaches to the strut body (in front)

AdamSanta85

Painting the rotor hats satin black... 3 hours to dry then into the oven for an hour

Joec500

so the fronts are straight plug and play with larger rotors and pads?

AdamSanta85

I haven't pulled it apart to 100% confirm on a 991.1 with 350mm Sebro, but I am almost sure, yes.

AdamSanta85

Looking fresh

SConn

Awesome!! Need to do mine as well. What time should I bring them over? 🤣

AdamSanta85

Hehe, as is typical with paint jobs, 2.5 hours of masking with tape and about 30 min of spraying. I still need to put them in the oven in a couple hours to cure them.

This is the paint I used, one can was just enough, I bought two.

Joec500

I am gonna wait until you are done so I can just order once and done Thanks for doing this bro!

AdamSanta85

Should be end of next week, I think pads shipped out of California today.

AdamSanta85

I got the FVD Stainless lines done this afternoon. Pretty easy job.

AdamSanta85

Oh baby.... MIGHT be able to do the fronts today....

AdamSanta85

They sent me ME20 compound... going on vacation next week... guess we won't have brakes for a few more weeks.