Zunnsport 991.2 Outter Grill Set
#61
I'd like to get these because I've always worried about damage to the radiators on the sides. But what is the purpose of the center screen? It looks like on my car (2017 4S with PK) there are center slats but just a plastic plate behind them, almost for decorative purposes. So is the center screen not really needed? Thanks
#62
Rennlist Member
Join Date: Jul 2001
Location: Marineland FL
Posts: 12,536
Likes: 0
Received 3,460 Likes
on
2,361 Posts
Bob Z., did your GTS come with a center radiator or not? Mine just has the plastic “filler”. If you don’t have the third radiator, did you mount the grill in front of the the plastic “filler” anyway?
I had the Rennline grills on my previous 991.1 but removing the bumper, and particularly disconnecting the wire harness, is something I’m not looking to do again...
I had the Rennline grills on my previous 991.1 but removing the bumper, and particularly disconnecting the wire harness, is something I’m not looking to do again...
The following users liked this post:
SwedeInNY (05-06-2020)
#63
Rennlist Member
I'd like to get these because I've always worried about damage to the radiators on the sides. But what is the purpose of the center screen? It looks like on my car (2017 4S with PK) there are center slats but just a plastic plate behind them, almost for decorative purposes. So is the center screen not really needed? Thanks
#65
Instructor
Originally Posted by BSO
Discount codes show invalid.
Do you guys think it would be feasible to paint these grills? I'm thinking agate gray for a gt silver T.
#66
Rennlist Member
Join Date: Jul 2001
Location: Marineland FL
Posts: 12,536
Likes: 0
Received 3,460 Likes
on
2,361 Posts
I don't see why not but if it were me I would have them sandblasted and powdercoated to ensure they hold up well, which should not cost much.
#68
Can someone take some pictures of the inside and outside of the fastening mechanism used to hold these grill covers in place ?
Specifically interested in the inside face.
The outside face appears to be just a screw/ fastener head but there is some kind of box/ plate behind the mesh.
Specifically interested in the inside face.
The outside face appears to be just a screw/ fastener head but there is some kind of box/ plate behind the mesh.
#69
Rennlist Member
Join Date: Jul 2001
Location: Marineland FL
Posts: 12,536
Likes: 0
Received 3,460 Likes
on
2,361 Posts
Can someone take some pictures of the inside and outside of the fastening mechanism used to hold these grill covers in place ?
Specifically interested in the inside face.
The outside face appears to be just a screw/ fastener head but there is some kind of box/ plate behind the mesh.
Specifically interested in the inside face.
The outside face appears to be just a screw/ fastener head but there is some kind of box/ plate behind the mesh.
#70
Rennlist Member
Like what Bob said, no screws. Only for the center grill. It’s so easy to install
#72
Rennlist Member
https://www.zunsport.com/en/porsche-...set?filter=331
just for the outer set, i was able to add.
full set is here...Assuming you need GTS ones.
https://www.zunsport.com/en/porsche-...set?filter=331
#74
EDIT: I was looking at the 991.1 versions. 991.2 are indeed not available to order. They were backordered when I placed my purchase mid-March and took a couple of weeks after for them to ship.
Last edited by T3X4S; 05-08-2020 at 02:20 PM.
#75
Rennlist Member
My gut feeling is these will look even better with the strakes removed. For those who have installed them, does that seem easy or feasible?
Funny thing is I hated the strakes on the Oak Green Carrera, but mind them a lot less and even sort of like them on the Brewster Green car. Paint color can be a funny thing…
Funny thing is I hated the strakes on the Oak Green Carrera, but mind them a lot less and even sort of like them on the Brewster Green car. Paint color can be a funny thing…