When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Are the 991.1 GT3 and 991.2 GT3 underbody fastener locations the same? I.e. is the same install process applicable to the .1 GT3 chassis?
Yes you can install all the parts on .1 as well, anyway you need to add all the additional fastener points in the underbody panels and wheel arches, since the .1 don.t have any strakes from factory.
I actually think the GT4RS pieces might fit better on the 991 cars. Since the 982 front tub is almost identical to the 991. It might not need any additional holes.
Yes you can install all the parts on .1 as well, anyway you need to add all the additional fastener points in the underbody panels and wheel arches, since the .1 don.t have any strakes from factory.
what we need to do is figure out the p/#'s for the 2RS parts ... and get a set ...
I now wonder if the 4RS strakes will also fit a 718 Spyder
edit: read this as 3rs for some reason. 99150445580 was the part number posted above for the 2rs but looking at photos, it looks the same as the .2 gt3/rs
edit: read this as 3rs for some reason. 99150445580 was the part number posted above for the 2rs but looking at photos, it looks the same as the .2 gt3/rs
I'm not sure about that - I need to look under my .2 to check
07-13-2022, 04:41 PM
