991 GT2/3RS strakes on GT3...
#1
Rennlist Member
Thread Starter
991 GT2/3RS strakes on GT3...
anyone successfully fitted the underbody "strakes" from either the 2 or 3 RS (991) onto a GT3?
#3
Rennlist Member
Thread Starter
#4
I think these are what you’re referring to. Photos from BAT. https://bringatrailer.com/listing/20...s-weissach-11/
#5
Rennlist Member
Thread Starter
yep - I thought though that the 2/3RS had more aggressive components than the 3...
similar to these: https://emotionengineering.co/collec...erbody-strakes
similar to these: https://emotionengineering.co/collec...erbody-strakes
#6
Rennlist Member
yep - I thought though that the 2/3RS had more aggressive components than the 3...
similar to these: https://emotionengineering.co/collec...erbody-strakes
similar to these: https://emotionengineering.co/collec...erbody-strakes
#7
Rennlist Member
Thread Starter
Trending Topics
#8
Rennlist Member
The following 3 users liked this post by Diego7K:
#9
Rennlist Member
the GT4RS have the same setup as well...I previously test fitted the fins that bolts behind the wheel arch and the bolts patterns seems the same as the stock strakes
Last edited by Diego7K; 07-08-2022 at 12:10 AM.
The following 4 users liked this post by Diego7K:
#10
Rennlist Member
Thread Starter
#12
Rennlist Member
Thread Starter
The following users liked this post:
Larry Cable (07-08-2022)
#14
Rennlist Member
Thread Starter
I'm reaching out to suncoast for details ... watch this space...
#15
Rennlist Member
992 under body aero bits, besides the brake duct, also different than the GT4 RS picture above,