991 GT2/3RS strakes on GT3...
#16
Rennlist Member
The GT4RS strakes are more closely resemble to the 991 RS MR strakes.
#17
Rennlist Member
Thread Starter
^^^ interesting! thx
#18
Rennlist Member
Thread Starter
probably best to go with 991 parts for a better chance of them fitting a gen2
#20
Rennlist Member
The part numbers for the 992 GT3 strakes are:
9GT805639 - 9GT805640 strakes
9GT805897 - 9GT805898 wheel arch air guide
Installation on my 991.2 postponed to next week, been too busy this weekend
9GT805639 - 9GT805640 strakes
9GT805897 - 9GT805898 wheel arch air guide
Installation on my 991.2 postponed to next week, been too busy this weekend
The following 3 users liked this post by Diego7K:
#21
Rennlist Member
Thread Starter
#22
Rennlist Member
#23
Rennlist Member
Thread Starter
#25
Rennlist Member
Thread Starter
really hard to tell from those photos ...
#26
Rennlist Member
The OEM part for .2 GT3 and GT3RS is the same: 99150445581
GT2RS part is 99150445580, but to me looks identical.
I previously installed the GT2RS ones on my old .1GT3 togheter with the rear diffuser, easy job, just made some small cuts on the fender liner and underbody to fit the screw holders, see pictures.
GT2RS part is 99150445580, but to me looks identical.
I previously installed the GT2RS ones on my old .1GT3 togheter with the rear diffuser, easy job, just made some small cuts on the fender liner and underbody to fit the screw holders, see pictures.
The following users liked this post:
RDCR (07-11-2022)
#27
Rennlist Member
Thread Starter
here is the e-motion eng part ... looks like it attaches to existing points..
The following users liked this post:
RDCR (07-11-2022)
#28
This thread is awesome! After Jamie at Dundon said he thought the 992 strakes would fit on the 991.2GT3 I called around to inquire about the parts and got nowhere. Now armed with the actual part numbers I called one of my local dealers and all for are available stateside and priced at $133 each. I would image Suncoast may have better pricing.
#29
Rennlist Member
Thread Starter
This thread is awesome! After Jamie at Dundon said he thought the 992 strakes would fit on the 991.2GT3 I called around to inquire about the parts and got nowhere. Now armed with the actual part numbers I called one of my local dealers and all for are available stateside and priced at $133 each. I would image Suncoast may have better pricing.