When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If you do have a 9/15 PTS approved list, Nate, what else does it say re: that color? Is a Uni color I presume...
What are the changes from the 7/15 list re: newly approved, rejected colors? Or new colors under feasibility?
Is it also marked 'For Internal Use Only - Confidential'?
By the way, we are part of the greater Porsche family and
are using this 'list' for the holiest of all possible 'internal uses' -
to order a product from a company! So we should be able to
discuss this list at our forum, don't you think?
Saludos,
Eduardo
Carmel
PS I don't believe there is a color named 'Lighting Green'.
There is 'Light Green' in PAG's translation to English from
the German 'Lichtgrün'. I would suggest that we try to
keep the names straight to avoid confusing folks not familiar
with common PTS color designations at Porsche. This is,
after all, called a 'Reference Guide to PTS' thread!
Yes, it's marked as uni and the list is marked as internal use only. Rennlist is internal to Porsche right? I'm sure this forum sells more Porsches than any other dealer in the world...
I've not had a chance to go through it vs previous lists, but this was the one that jumped out at me while I was looking for ideas for the 911R - assuming I get one and they allow PTS again.
Deviated stitch IS in fact available for the RS starting on 11-1 production (week 44 and beyond)
I know this beyond a shadow of a doubt, and have even gotten a confirmation of deviated stitch on my recently specced garage queen UV RS lovingly referred to by a involved with its build as The Joker.
In the recently open deviated stitching window (cxx naturally and $5690 usd but NOT including headrest model designation, door pulls, floor mats, 12" marker, OR exclusive options unless specified and PAID DEARLY for again via cxx) the available colors include:
Acid Green (more on that in a min)
Racing Yellow
Guards Red
White
Black
.......
According to Melissa:
The logo on the headrest is definitely a part of the stitching package, as is the stitching of the logo on the rear center tunnel. That is even noted on the description of option CXP in the configurator.
What does the piping option cost if one keeps the stitching color as standard?
farfromcommongt3 gave us what he thought it cost at an earlier post, but perhaps you can pm directly so
that he can provide us with more details.
Originally Posted by W8MM
According to Melissa:
Mike: As it seems that none of our dealer Rennlisters (Geoff at Isringhausen or Charlie at 'Auto Gallery') have
chimed in with a clarification to what was earlier posted (and which was contradicted by Melissa in the case of
door pulls apparently not available in 'Acid Green'), I have asked my contact at 'Porsche Exclusive' in Germany
to see if he can answer for us a number of questions on this topic. My email was sent today and let's see if we
can get them to respond & explain for us what is truly available. As all could see today, the LWB seats are available
with color piping...which is something we were told would not be available on that particular seat version!
farfromcommongt3 gave us what he thought it cost at an earlier post, but perhaps you can pm directly so that he can provide us with more details. Mike: As it seems that none of our dealer Rennlisters (Geoff at Isringhausen or Charlie at 'Auto Gallery') have chimed in with a clarification to what was earlier posted (and which was contradicted by Melissa in the case of door pulls apparently not available in 'Acid Green'), I have asked my contact at 'Porsche Exclusive' in Germany to see if he can answer for us a number of questions on this topic. My email was sent today and let's see if we can get them to respond & explain for us what is truly available. As all could see today, the LWB seats are available with color piping...which is something we were told would not be available on that particular seat version! Saludos, Eduardo Carmel .
Eduardo, as noted in the other thread, the factory can paint the intakes. Can you provide a code for that?
Optional 'painted' intake to match exterior color...
Originally Posted by Dr. G
Eduardo, as noted in the other thread, the factory can paint the intakes.
Can you provide a code for that?
Good eye, Dr. G! Are you an ophthalmologist by chance?
I didn't ask that specifically to PAG. I did asked them what it cost ($)
to duplicate the 'Lava Orange & White' paint job on that show car at
the Zuffenhausen delivery center, so their answer might include details
about each option that it involves to order that vehicle!
And maybe someone here at Rennlist has already inquired of 'Porsche
Exclusive' in the US, either in Atlanta or Beverly Hills. And perhaps he
or she knows the answer to that question already! Remember that it's
their job to provide customers like those of you ordering RSs with the
specific information on all of these options. They are getting paid to
do this. That is the business of 'Porsche Exclusive'!
Nobody has yet mentioned the rear deck lid matched to exterior colour, as on the Frankfurt IAA model.
(And the obvious painted door handle insert, winglets, wheels, and side mirrors in white.)
Looks like they checked all the custom painted options!
Thanks Eduardo. I guess that birch rs is destined for the museum vault then? Clearly they liked that colour. Interesting that they are presumably keeping a pts car with those custom stickers and such (plus I'm guessing uv lo etc). It's a good look and a bit of a shame they didn't offer cars like this to customers.
I'd love to put just the side graphic in silver/grey on my UV RS.
Reminds me of 997.1 RS graphic. I wonder if it's the same one?
Prob not.
Anyone know?
Thanks.
I'd love to put just the side graphic in silver/grey on my UV RS.
Reminds me of 997.1 RS graphic. I wonder if it's the same one?
Prob not.
Anyone know?
Thanks.
Looks very close, but likely adjusted to fit the 991. Now that the retro 1970's .1RS livery is "factory approved" on the 991RS I bet we'll be seeing it more.
11-16-2015, 03:19 PM
