what did you do with your 968 today.....
07-22-2020, 01:44 PM
#751
Headed to the Beach..
The following users liked this post:
ste1999 (07-22-2020)
07-22-2020, 01:56 PM
#752
Clocked another Bag of Sand along the way..
Opened up the Pot.. Woah..! That is BRIGHT..!!
Here's a Time Lapse of the Painting..
First Coat..
Second Coat..
Two Coats.. Next up is Wet & Dry flatting and then some Polishing..!
Got back to London and gave the Sport a much needed Wash & Wax..!!
The following 2 users liked this post by kingroon:
Jay Wellwood (07-22-2020),
ste1999 (07-22-2020)
07-22-2020, 10:54 PM
#753
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Join Date: May 2001
Location: Hotlanta - NE of the Perimeter
Posts: 12,269
Received 266 Likes
on
153 Posts
Nice!
Here in the South we could not paint those outside...at least not without at least a dozen small flies or other bugs landing on the paint. Well done.
Here in the South we could not paint those outside...at least not without at least a dozen small flies or other bugs landing on the paint. Well done.
07-23-2020, 10:12 AM
#754
Team Owner
Thread Starter
Join Date: Oct 2009
Location: one thousand, five hundred miles north of Ft. Lauderdale for the summer.
Posts: 28,705
Received 212 Likes
on
153 Posts
Drove 5000 miles in 6 weeks,
including a trip from Oklahoma to the Boston area.
this past week: Boston area to Erie, PA,
Then to NYC,
Then, back to the Boston area.
V8's 'r good..........
including a trip from Oklahoma to the Boston area.
this past week: Boston area to Erie, PA,
Then to NYC,
Then, back to the Boston area.
V8's 'r good..........
The following users liked this post:
kingroon (07-23-2020)
07-23-2020, 10:37 AM
#755
Really liking putting the miles on my 968 recently, it loves being driven..
07-23-2020, 10:00 PM
#756
Rennlist Member
The following users liked this post:
kingroon (07-24-2020)
07-27-2020, 09:40 PM
#757
Racer
07-28-2020, 04:43 AM
#758
Time for the Flatting & Polishing..!!
600 Wet & Dry that is "so old it's almost just paper".. Perfect for the job..
Flatted nicely..
One down, one to go..
Polishing time, and an old favourite..
My shoulders & arms hurt..
600 Wet & Dry that is "so old it's almost just paper".. Perfect for the job..
Flatted nicely..
One down, one to go..
Polishing time, and an old favourite..
My shoulders & arms hurt..
The following users liked this post:
kingroon (07-29-2020)
The following 4 users liked this post by ste1999:
08-06-2020, 05:24 PM
#761
Crosspost: https://rennlist.com/forums/944-turb...l#post16826788
Last week I saved another 7lbs on my 968. I dumped the heavy stock double fan for a Spal VA08-AP71/LL-53A 12V fan. The Spal works as expected very well, even with my AC on in stop-and-go traffic at 86 °F. The Spal is much quieter than the noisy stock fan. So I think it was a worthwhile effort.
Here two pics. The three red arrows indicate the small needed modification on the crossmember above the cooler.
Last week I saved another 7lbs on my 968. I dumped the heavy stock double fan for a Spal VA08-AP71/LL-53A 12V fan. The Spal works as expected very well, even with my AC on in stop-and-go traffic at 86 °F. The Spal is much quieter than the noisy stock fan. So I think it was a worthwhile effort.
Here two pics. The three red arrows indicate the small needed modification on the crossmember above the cooler.
The following 4 users liked this post by H.F.B.:
08-07-2020, 06:36 AM
#762
Last week I saved another 7lbs on my 968. I dumped the heavy stock double fan for a Spal VA08-AP71/LL-53A 12V fan. The Spal works as expected very well, even with my AC on in stop-and-go traffic at 86 °F. The Spal is much quieter than the noisy stock fan. So I think it was a worthwhile effort.
08-12-2020, 05:05 AM
#763
Decided to make some Stowage Covers for my Rear Seat Delete Shelf..
Carpet and Pull Straps are in the post, as are some Magnetic retainers to hold them in place..
I bought this piece of Ply months ago, reserving it for this very Job..
Bendy Wendy, Tape Measure and a Pencil..
Simple, but very effective..
Ready to..
..Jigsaw..
Trial fit.. Perfecto..!
Trial fit the DS in the NDS slot to very template..
Yacht Varnish..
Carpet and Pull Straps are in the post, as are some Magnetic retainers to hold them in place..
I bought this piece of Ply months ago, reserving it for this very Job..
Bendy Wendy, Tape Measure and a Pencil..
Simple, but very effective..
Ready to..
..Jigsaw..
Trial fit.. Perfecto..!
Trial fit the DS in the NDS slot to very template..
Yacht Varnish..
The following 3 users liked this post by kingroon:
08-12-2020, 07:21 AM
#765