964 C4 light refurb
#992
Rennlist Member
Thread Starter
The emergency cable is threaded through an exisiting hole that comes out next to the air con condenser. You can access it by removing the side reflector. The only challenge is attaching it to the catch as the 1990 model didn’t have provision for an emergency release.
#993
Rennlist Member
Thread Starter
I took the car to an autocross event with the local Porsche Club. The theory was for a 7/10ths run, but that plan quickly went out the window. I was third out of 30 cars. Road legal Hankook Z221 track tyres and that 4wd system proved to be the difference.
#994
Rennlist Member
Thread Starter
Q
With the autocross finished I decided to tackle three big jobs:
1. Replace the Air con evaporator
2. Fix the crack in the driver door inner skin and modify the stay mechanism; and
3. Fit new carpet.
Tonight was a general tear down, starting with a relatively empty garage because I know how congested it will become. The real work is yet to come.
#995
Burning Brakes
#998
Rennlist Member
Thread Starter
I know my car well and as I keep on saying a C4 in real world driving is a great drivers car. It gives nothing away to the C2 and walks away from it in the wet.
#999
Burning Brakes
I'd definitely check your evaporator blowers since you're pulling it apart. I'm eager to see how well my A/C works this summer now that I've changed mine out.
#1000
Rennlist Member
Thread Starter
I'm aiming to have this car for life so I want it to be in as near new condition as I can get it right now. Apart from evidence of a small hit under the front left frunk area (I suspect it hit a kerb) I know this car is totally rust and accident free. Glass out respray, engine rebuild and transmission rebuild all done. These three tasks will get me to near perfect. I've even ordered an interior screw kit from Classic 9 to go through each fitting to make sure it's correct.
#1001
Formerly turbotwoshoes
Rennlist Member
Rennlist Member
It took my about two years, but I also added the RUF suspension parts to mine when I overhauled the frontend. Mostly just torsion bars and I uprated the shocks. Before I was running true cup shocks 600/900 with mono ball top hats. One 400 mile trip with my wife made me change it to a more forgiving spring rate (H&R Sport coilovers with about 1/2 the spring) will allow me to skip the dental visit. The expansion cracks on the bridges in Tennessee made me almost chip a tooth. It actually handles better now and the ride is something that I may drive to Cali in May.
#1004
Rennlist Member
Thread Starter
Any tips would be helpful. I need to siphon the tank tomorrow. Tonight I just checked the condenser and resistor. Both look fine from this side although the condenser may be a lot dirtier on the intake side.
Last edited by John McM; 03-02-2018 at 05:34 PM.
#1005
Rennlist Member
Thread Starter
I decided to do the door first as the body guy could turn up any day to take it away.
I took the window motor and regulator out, then removed the window frame, and finally the window. There’s evidence of rust in the window rail, but given the new price I’ll stem the corrosion rather than replace.
I used paint thinner to remove the Ados contact adhesive used to affix the cheap membrane (comes without adhesive - maybe I could have used a better one than contact adhesive?). What goes on now is the Porsche self adhesive one. It may be expensive but it’s better long term value.
Last edited by John McM; 03-04-2018 at 03:24 PM.