Tech Art front splitter - GroupBuy ON!
11-26-2013, 04:42 PM
#226
Drifting
Thread Starter
Right! Very happy to say its a perfect fit.
It's not the easiest to install as access is restrictive and the clips that the screws go through on mine were quite rusty.
Also one screw on each end of the side parts of splitter have trouble reaching bracket. I used longer screws. The original TechArt item requires the same.
But the end result is very good and a good fitment.
The splitter is obviously less visible on a black car - I imagine like 993 door handles on bright cars it'll look even better.
It's not the easiest to install as access is restrictive and the clips that the screws go through on mine were quite rusty.
Also one screw on each end of the side parts of splitter have trouble reaching bracket. I used longer screws. The original TechArt item requires the same.
But the end result is very good and a good fitment.
The splitter is obviously less visible on a black car - I imagine like 993 door handles on bright cars it'll look even better.
11-28-2013, 08:40 AM
#232
Rennlist Member
Looks great Frank! Well worth the wait in the end...
Can't wait for my cf ones!! Course with snow and salt already on the ground, car is away and there is absolutely no rush.
I echo your thanks to LWS.
What screws did you use for the end holes?
Brad
Can't wait for my cf ones!! Course with snow and salt already on the ground, car is away and there is absolutely no rush.
I echo your thanks to LWS.
What screws did you use for the end holes?
Brad
11-28-2013, 11:15 AM
#233
Drifting
Thread Starter
Can't wait to see how the other ones turn out on brighter coloured cars and the carbon fibre option.
Here's a better/ clearer pic of the splitter on the car.
Cheers Gents,
Yup - painted and on. 
Cheers, I used some longer screws I had lying around the garage. The shorter ones work also but longer ones reach better IMO.
Here's a better/ clearer pic of the splitter on the car.
Cheers, I used some longer screws I had lying around the garage. The shorter ones work also but longer ones reach better IMO.
11-29-2013, 12:24 PM
#236
Drifting
Thread Starter
Last edited by BLACK-BETTY; 11-30-2013 at 04:08 AM.
11-29-2013, 04:57 PM
#237
Rennlist Member
Join Date: Nov 2010
Location: North Yorkshire, England
Posts: 855
Likes: 0
Received 16 Likes
on
14 Posts
I look forward to seeing your carbon fibre version, will you painting it Paul?
I'm going to fit it first and see how it looks, maybe it will balance the front with the engine compartment
. If it looks a bit too bling I'll paint
Cheers,
Paul
03-05-2014, 06:33 AM
#239
Rennlist Member
Join Date: Nov 2010
Location: North Yorkshire, England
Posts: 855
Likes: 0
Received 16 Likes
on
14 Posts
Hi,
A few pics sent by Andrew of the carbon ones, taken last week which Brad and I hope to have very soon. I'll post more when mine's fitted.
Cheers,
Paul
A few pics sent by Andrew of the carbon ones, taken last week which Brad and I hope to have very soon. I'll post more when mine's fitted.
Cheers,
Paul
