Pending projects and a few q?
#211
Professor of Pending Projects
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Add a phillips and flat head screwdrivers, one more 13mm wrench, 10mm wrench for the smaller bolts that hold the muffler bracket... some rtv silicone to put a dab on the header gaskets to keep them defying gravity... and long 10mm,13mm, 15mm sockets... I think that covers the tools... will do inventory when putting everything back and update the list.
#212
Professor of Pending Projects
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
As you can see in the picture in my last post, I cant' get the muffler close enough for the pipes to reach the header. I can drop the muffler further down, but then it hangs down below the back of the car, and will scrape. That muffler should be up out of the way and out of sight. What I need are some longer pipes. ![cherrsagai](https://rennlist.com/forums/graemlins/drink.gif)
![cherrsagai](https://rennlist.com/forums/graemlins/drink.gif)
I will email Fabspeed to have them take a look at the thread and see what else they can comment on it.
![Confused](https://rennlist.com/forums/images/smilies/confused.gif)
#213
Professor of Pending Projects
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I ordered the tips to be welded once I have everything aligned... so not sure if they sent me different pipes. As it is, without the tips, they sit a bit into the bumper... so no way to use them like that (without tips) in my case since that would end up in a melted bumper...
#214
Professor of Pending Projects
Rennlist Member
Rennlist Member
Thread Starter
![Cool](https://rennlist.com/forums/images/icons/icon6.gif)
As you can see in the picture in my last post, I cant' get the muffler close enough for the pipes to reach the header. I can drop the muffler further down, but then it hangs down below the back of the car, and will scrape. That muffler should be up out of the way and out of sight. What I need are some longer pipes. ![cherrsagai](https://rennlist.com/forums/graemlins/drink.gif)
![cherrsagai](https://rennlist.com/forums/graemlins/drink.gif)
Yours with the muffler nicely hidden...
![](https://rennlist.com/forums/attachments/964-forum/349781d1238977913-pending-projects-and-a-few-q-100_0688.jpg)
Mine (I will try to get a photo from the same angle as yours for better comparison)...
![](http://forums.rennlist.com/upload/113_800x600_copy1.jpg)
#215
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Wachuko, I did email Alex at Fabspeed, to let him know I was having a bit of trouble fitting the muffler, hopefully he wil have the answer. It sure is a fine looking system, and I did hook it all up yesterday, but without the heater pipe in place, started it up, and man does that sound good, I cant' wait to get it all finished.
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
#216
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Add a phillips and flat head screwdrivers, one more 13mm wrench, 10mm wrench for the smaller bolts that hold the muffler bracket... some rtv silicone to put a dab on the header gaskets to keep them defying gravity... and long 10mm,13mm, 15mm sockets... I think that covers the tools... will do inventory when putting everything back and update the list.
![banghead](https://rennlist.com/forums/graemlins/banghead.gif)
![banghead](https://rennlist.com/forums/graemlins/banghead.gif)
![banghead](https://rennlist.com/forums/graemlins/banghead.gif)
#217
Professor of Pending Projects
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I had removed the left side header not too long ago and used anti seize on the bolts before putting it back, so that side was easy to take out... on the other side I soaked the bolts with penetrating oil several times, warmed up the car a bit, soaked on penetrating oil again... still those two were difficult to get out. One came out with stud and all...
#218
Professor of Pending Projects
Rennlist Member
Rennlist Member
Thread Starter
![Cool](https://rennlist.com/forums/images/icons/icon6.gif)
Since one of the side markers was loose (broken tab) I went ahead and updated the side markers to clear units...
![](http://forums.rennlist.com/upload/dscn0373_640x480.jpg)
![](http://forums.rennlist.com/upload/dscn0374_640x480.jpg)
![](http://forums.rennlist.com/upload/dscn0375_640x480.jpg)
![](http://forums.rennlist.com/upload/dscn0373_640x480.jpg)
![](http://forums.rennlist.com/upload/dscn0374_640x480.jpg)
![](http://forums.rennlist.com/upload/dscn0375_640x480.jpg)
![](http://forums.rennlist.com/upload/dscn0376_640x480.jpg)
#220
Professor of Pending Projects
Rennlist Member
Rennlist Member
Thread Starter
#222
Professor of Pending Projects
Rennlist Member
Rennlist Member
Thread Starter
#223
Professor of Pending Projects
Rennlist Member
Rennlist Member
Thread Starter
![Cool](https://rennlist.com/forums/images/icons/icon6.gif)
Redesigned parts for the Fabspeed muffler came in. Started installing these last night... then, while in there... decided it was time to take out the bumper, get the corner painted and install... paint the spoiler... So it is disassembly time!
I removed the muffler and put in the straight pipes so I can work on removing the bumper and still be able to move the car around.
Started last night (around 10:30pm)... I will setup the lift this afternoon to make it easier to work under the car.![bigbye](https://rennlist.com/forums/graemlins/xyxwave.gif)
![](http://forums.rennlist.com/upload/dscn0394_640x480.jpg)
![](http://forums.rennlist.com/upload/dscn0395_640x480.jpg)
![](http://forums.rennlist.com/upload/dscn0396_640x480.jpg)
![](http://forums.rennlist.com/upload/dscn0397_640x480.jpg)
![](http://forums.rennlist.com/upload/dscn0399_640x480.jpg)
Nice big oval tip![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
![](http://forums.rennlist.com/upload/dscn0402_640x480.jpg)
![](http://forums.rennlist.com/upload/dscn0403_640x480.jpg)
Starting to take the bumper apart...
![](http://forums.rennlist.com/upload/dscn0401_640x480.jpg)
More to come....
I removed the muffler and put in the straight pipes so I can work on removing the bumper and still be able to move the car around.
Started last night (around 10:30pm)... I will setup the lift this afternoon to make it easier to work under the car.
![bigbye](https://rennlist.com/forums/graemlins/xyxwave.gif)
![](http://forums.rennlist.com/upload/dscn0394_640x480.jpg)
![](http://forums.rennlist.com/upload/dscn0395_640x480.jpg)
![](http://forums.rennlist.com/upload/dscn0396_640x480.jpg)
![](http://forums.rennlist.com/upload/dscn0397_640x480.jpg)
![](http://forums.rennlist.com/upload/dscn0399_640x480.jpg)
Nice big oval tip
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
![](http://forums.rennlist.com/upload/dscn0402_640x480.jpg)
![](http://forums.rennlist.com/upload/dscn0403_640x480.jpg)
Starting to take the bumper apart...
![](http://forums.rennlist.com/upload/dscn0401_640x480.jpg)
More to come....
![bigbye](https://rennlist.com/forums/graemlins/xyxwave.gif)
#225
Professor of Pending Projects
Rennlist Member
Rennlist Member
Thread Starter
![Cool](https://rennlist.com/forums/images/icons/icon6.gif)
You could... but I took them all out... call me crazy but I like to look at the engine... wife will sometimes find me laying on the floor under the car day dreaming
I really enjoy looking at all the details on the engines in these cars...
Anyway, I figured, that without all those covers, I can clean it better and have better, quicker access when doing the maintenance.
![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
Anyway, I figured, that without all those covers, I can clean it better and have better, quicker access when doing the maintenance.
![bigbye](https://rennlist.com/forums/graemlins/xyxwave.gif)