Ealokens Porshe 951
09-30-2020, 04:04 AM
Three Wheelin'
Thread Starter
Join Date: Aug 2016
Posts: 1,338
09-30-2020, 02:13 PM
Rennlist Member
Join Date: Dec 2002
Location: Los Angeles, CA
Posts: 546
09-30-2020, 03:48 PM
Racer
Join Date: Dec 2015
Location: Albuquerque, NM
Posts: 476
Sorry to see that! Was there a bolt in the combustion chamber? I wonder if that piston could be cleaned up and reused...
10-01-2020, 02:32 AM
Three Wheelin'
Thread Starter
Join Date: Aug 2016
Posts: 1,338
Quote:
Originally Posted by
968to986
Sorry to see that! Was there a bolt in the combustion chamber? I wonder if that piston could be cleaned up and reused...
8mm washer, i found some parts og it.
I ordered new pistons. Wiseco ONLY sell kits. So i bought 5pc.
Head is welded, machining it Next week.
10-02-2020, 04:29 AM
8th Gear
Join Date: Jun 2010
Location: Stavanger, Norway
Posts: 8
Received 0 Likes
on
0 Posts
Looks like the intake valve took a beating as well?
Sorry to see, we have all been there in this (expensive) hobby....
10-02-2020, 04:32 AM
Three Wheelin'
Thread Starter
Join Date: Aug 2016
Posts: 1,338
Quote:
Originally Posted by
Alcaid
Looks like the intake valve took a beating as well?
Sorry to see, we have all been there in this (expensive) hobby....
We took out alle the valves, no bent or damaged.
Yeah, and wiseco didn`t sell one piston, so i bought 5.
Anyone need a set for sleeved engine? 8:1 compression.
10-09-2020, 02:38 AM
Three Wheelin'
Thread Starter
Join Date: Aug 2016
Posts: 1,338
Head just got back from my friend.
Now, we wait on some parts from Wiseco, Cometic and ARP..
10-18-2020, 05:13 PM
Three Wheelin'
Thread Starter
Join Date: Aug 2016
Posts: 1,338
So the head is back after Welding and decking.
oil pump is ported, hoping it will deliver pressure to 7000rpm.
The following 2 users liked this post by ealoken:
10-25-2020, 01:46 PM
Three Wheelin'
Thread Starter
Join Date: Aug 2016
Posts: 1,338
Pump rebuild done.
01-10-2021, 01:31 PM
Three Wheelin'
Thread Starter
Join Date: Aug 2016
Posts: 1,338
01-11-2021, 03:24 PM
Race Car
Join Date: May 2013
Location: Calgary, Alberta, Canada
Posts: 4,015
Oh dear. I'm very sorry. It could happen to anyone.
01-11-2021, 06:07 PM
ThefuRennlist Member
Join Date: Sep 2003
Location: 28*09'58.16" N, 82*35'17.07" W
Posts: 19,934
Dude, you can rebuild...
VIDEO
Hopefully for a bit less than 6 mil.
01-11-2021, 10:32 PM
Racer
Join Date: Dec 2015
Location: Albuquerque, NM
Posts: 476
Hang in there. You’ve done so much amazing work on this project, you have to see it to the end to experience it’s full potential!
01-12-2021, 03:21 AM
Three Wheelin'
Thread Starter
Join Date: Aug 2016
Posts: 1,338
Quote:
Originally Posted by
968to986
Hang in there. You’ve done so much amazing work on this project, you have to see it to the end to experience it’s full potential!
Thanks, things are in motion, engine is planed to go in the car in March.
01-12-2021, 03:22 AM
Three Wheelin'
Thread Starter
Join Date: Aug 2016
Posts: 1,338
Quote:
Originally Posted by
SeaCay
haha, thanks.
im 40k+ in this car :O
10-01-2020, 02:32 AM
Sorry to see, we have all been there in this (expensive) hobby....
