When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
New gearbox project in house, Audi s2 6speed.
will start on this after the car is done now for winter.
Hoping to dyno in October.
4.11 final ratio 1st 3.50 2nd 1.89 3rd 1.32 4th 1.03 5th 0.86 6th 0.71
Keep us updated on that transmission. It's obviously a bit longer than stock, which shouldn't be a problem for cars with the spare tire well cut out. What about the rest of the case? pretty well bolt on?
Keep us updated on that transmission. It's obviously a bit longer than stock, which shouldn't be a problem for cars with the spare tire well cut out. What about the rest of the case? pretty well bolt on?
It's a bit longer, but the bolt pattern is bolt on to the torque tube.
I need to fabricate some parts.
New driveshats
Gear link
Coupler gearbox - torquetube axle.
Due to a big house renovation the 951 has not got the attention it deserves, when adding upp my no sleep over the oem ignition reading on the flywheel i was on the look for a solution.
DRS Development came up with an adapter wich includes an ATI damper ( good bye balanceshafts ) and a 60-2 trigger wheel.
Adding one camsensor, it`s now a solution my tuner likes.