Ealokens Porshe 951
04-29-2019, 11:10 AM
Race Car
Join Date: May 2013
Location: Calgary, Alberta, Canada
Posts: 4,015
Looking good! What role does EGT Pyrometer play when tuning?
04-29-2019, 12:01 PM
Three Wheelin'
Thread Starter
Join Date: Aug 2016
Posts: 1,338
Quote:
Originally Posted by
Noahs944
Looking good! What role does EGT Pyrometer play when tuning?
to see that all cylinders are in the same area regarding temp. If one cyl is of by 50-100 deg something is wrong on the fuel/ignition side.
04-29-2019, 01:11 PM
Race Car
Join Date: May 2013
Location: Calgary, Alberta, Canada
Posts: 4,015
Quote:
Originally Posted by
ealoken
to see that all cylinders are in the same area regarding temp. If one cyl is of by 50-100 deg something is wrong on the fuel/ignition side.
Oh that makes sense. In the past I though individual sensors on the header primary tubes were o2 sensors for ITBs, is this also possible?
04-29-2019, 05:09 PM
Three Wheelin'
Thread Starter
Join Date: Aug 2016
Posts: 1,338
Quote:
Originally Posted by
Noahs944
Oh that makes sense. In the past I though individual sensors on the header primary tubes were o2 sensors for ITBs, is this also possible?
why sensors on itb? You only need boost and temp inn.
04-29-2019, 05:12 PM
Three Wheelin'
Thread Starter
Join Date: Aug 2016
Posts: 1,338
05-07-2019, 05:13 PM
Three Wheelin'
Thread Starter
Join Date: Aug 2016
Posts: 1,338
Making babysteps
05-10-2019, 06:14 PM
Three Wheelin'
Thread Starter
Join Date: Aug 2016
Posts: 1,338
Engine is almoste ready to go in.
Timing done.
05-11-2019, 02:59 PM
Three Wheelin'
Thread Starter
Join Date: Aug 2016
Posts: 1,338
05-14-2019, 02:53 PM
Three Wheelin'
Thread Starter
Join Date: Aug 2016
Posts: 1,338
Wooohooo!!
05-22-2019, 06:18 PM
Three Wheelin'
Thread Starter
Join Date: Aug 2016
Posts: 1,338
Downpipe in the making.
Not my welds
05-25-2019, 05:30 AM
AddictRennlist Member
Join Date: Aug 2007
Location: Slovenia
Posts: 8,385
Awesome progress. Congrats!!
05-28-2019, 05:39 PM
Three Wheelin'
Thread Starter
Join Date: Aug 2016
Posts: 1,338
05-29-2019, 12:49 AM
Pro
Join Date: Jul 2017
Location: Arcata, California
Posts: 618
05-29-2019, 02:03 AM
Three Wheelin'
Thread Starter
Join Date: Aug 2016
Posts: 1,338
Quote:
Originally Posted by
Chapman951
Beautiful welds!
Thanks, ill tell my welder. i quote him.
Here Erik, now it has the internet colours.
The following users liked this post:
05-29-2019, 08:24 AM
Drifting
Join Date: Dec 2009
Location: Calgary
Posts: 2,559