3 Liter 16v Turbo build
10-03-2013 | 01:33 PM
#197
Addict
Rennlist Member
Rennlist Small
Business Sponsor
Rennlist Member
Rennlist Small
Business Sponsor
Joined: Jul 2001
Posts: 7,505
Likes: 37
From: Marietta, NY
10-03-2013 | 03:53 PM
#198
Thread Starter
Three Wheelin'
Joined: Jul 2011
Posts: 1,796
Likes: 5
From: Hollandaaaa
Well that's a nice statement! Will be thinking about it, but for now this looks very good to me, also, if i do get the studs on i'll probably get blinding nuts on there, that looks even better! And to make sure they don't get off i'll get Nord-lock washers on there.. 
10-06-2013 | 04:19 PM
#202
Thread Starter
Three Wheelin'
Joined: Jul 2011
Posts: 1,796
Likes: 5
From: Hollandaaaa
Thanks PA! I'll be continuing tomorrow again, probably all finished for the first time turning it around! Than just have to wait for the engine mounts and than the fabbing work can start!
12-29-2013 | 05:06 PM
#203
Thread Starter
Three Wheelin'
Joined: Jul 2011
Posts: 1,796
Likes: 5
From: Hollandaaaa
So.. Here is a real update:
Engine has been completely finished, just have to mount the balanceshaft belt and make a small bracket for the oil pickup tube.
BUT! We have already started on the exhaust header so here some pics:
Tomorrow we're on to the Turboooo!!
Engine has been completely finished, just have to mount the balanceshaft belt and make a small bracket for the oil pickup tube.
BUT! We have already started on the exhaust header so here some pics:
Tomorrow we're on to the Turboooo!!
01-04-2014 | 06:04 AM
#207
Thread Starter
Three Wheelin'
Joined: Jul 2011
Posts: 1,796
Likes: 5
From: Hollandaaaa
So, the header has been finished. Just the bungs for the EGT have to be put in.
The cross over is finished as well and that one just needs the Wastegate attached and the AFR bung in. I hope we can start the downpipe soon as well and can continue on to the intake than..
Just figuring out if i'm going to relocate the AOS or not for some more space there..
The cross over is finished as well and that one just needs the Wastegate attached and the AFR bung in. I hope we can start the downpipe soon as well and can continue on to the intake than..
Just figuring out if i'm going to relocate the AOS or not for some more space there..
01-04-2014 | 01:29 PM
#209
Drifting
Joined: Aug 2009
Posts: 2,239
Likes: 2
From: Bangkok, Thailand, Milpitas, CA & Weeki Wachee, FL
Somebody, I think Scott H posted up some really cool adaptors that would make AOS relocation much easier. I had no idea this were available. Looking great!!!