When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I got the "baskets" from DRS, but they are probably from the same supplier as anyone uses in the Netherlands; Van Tul Fibreglass. I'm making the plexiglass panels myself!
We got these GTS buckets from ebay but i can order the buckets and lots of other fiberglass and carbon parts here in the Netherlands (but ships worldwide good quality and reasonable prices) from: http://rnr-motorsport.com/
@Bas nice work i h8 you for having your engine done earlier then me.. damn taxes..!! Kidding keep going at this pace can't wait to take a drive with you.
Well.. to be honest i was thinking of making my own splitter from an aluminium plate with the 2 race bars on them to keep them in place. Mostly for trackuse than. Just have to see if i'll do it or not
Well, finally an interesting update; the engine builder finished the cilinderblock! all the cilinders are bored and sleeved so the next thing is the pistons. Pistons are being measured and calculated now and headgasket as well. So here some pictures: