996tt mono Block adapters Available now - UPDATED 2-9-10
#78
Race Car
Thread Starter
Join Date: Sep 2005
Location: TEXAS
Posts: 4,247
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Well.. Holy cow. Time to finally install the Brakes! Some amount of time has passed. Pretty much 2 years.
My biggest problem was wheels that didn't fit. Since I found the deal of the decade for rims. The brakes now fit. - inside the wheel. HUGE amount of room in this rim. It almost makes these brakes looks average. I have also upgraded to a full 87 and later suspension, with these 968 spindles, and 87+ (longer) tie rods. I still have much to do. I have to get the car painted before I install the custom brake lines I have to make. I still have all the Tilton pedal parts to install after painting. So. a weekend or two of work before the brake system is complete. AND only after the car is painted. So.. time.
Anyway, here is a pic of the Brake and rotor mounted in its place. - Oh.. no idea if any of the brackets are still around. But I just heard that Sam still has his cnc mill so all may not be lost.
![](http://i508.photobucket.com/albums/s324/95ONE/IMAG0547.jpg)
My biggest problem was wheels that didn't fit. Since I found the deal of the decade for rims. The brakes now fit. - inside the wheel. HUGE amount of room in this rim. It almost makes these brakes looks average. I have also upgraded to a full 87 and later suspension, with these 968 spindles, and 87+ (longer) tie rods. I still have much to do. I have to get the car painted before I install the custom brake lines I have to make. I still have all the Tilton pedal parts to install after painting. So. a weekend or two of work before the brake system is complete. AND only after the car is painted. So.. time.
![Frown](https://rennlist.com/forums/images/smilies/frown.gif)
Anyway, here is a pic of the Brake and rotor mounted in its place. - Oh.. no idea if any of the brackets are still around. But I just heard that Sam still has his cnc mill so all may not be lost.
![](http://i508.photobucket.com/albums/s324/95ONE/IMAG0547.jpg)
![](http://i508.photobucket.com/albums/s324/95ONE/IMAG0561.jpg)
#79
Addict
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I can confirm 996tt calipers will fit under 17" Cup 2's with a 7 mm spacer, 9" Cup 2's will fit without spacers, alas I have only test fit so far. Time flies..... like Bruce said " Holy Cow" ![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
![](https://rennlist.com/forums/members/david-floyd-albums-996tt-monobloc-calipers-picture9849-996tt-monobloc-test-fit-640x361.jpg)
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
![](https://rennlist.com/forums/members/david-floyd-albums-996tt-monobloc-calipers-picture9849-996tt-monobloc-test-fit-640x361.jpg)
![](https://rennlist.com/forums/members/david-floyd-albums-996tt-monobloc-calipers-picture9850-cupii-and-996tt-calipers-640x361.jpg)
#80
Race Car
Thread Starter
Join Date: Sep 2005
Location: TEXAS
Posts: 4,247
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
[QUOTE=David Floyd;9076022]I can confirm 996tt calipers will fit under 17" Cup 2's with a 7 mm spacer, 9" Cup 2's will fit without spacers, alas I have only test fit so far. Time flies..... like Bruce said " Holy Cow" ![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
I'm rootin for ya Dave..
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
I'm rootin for ya Dave..
![cherrsagai](https://rennlist.com/forums/graemlins/drink.gif)
#81
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Yes time flies. We did these Monoblock conversions about 6 years ago. Adapters are directly available from Antti's 9Products.com parts shop. I suppose his company is the only one who can offer a complete kit; including rear Monblock conversion parts as well.
![](http://9products.com/sites/default/files/9P-44GT3kit_0.jpg)
http://9products.com/gt3-brake-adapter-kit
![](http://9products.com/sites/default/files/9P-44GT3kit_0.jpg)
http://9products.com/gt3-brake-adapter-kit
#83
Race Car
Thread Starter
Join Date: Sep 2005
Location: TEXAS
Posts: 4,247
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Isn't it funny with all the new brake threads right now? Good stuff and options.
#84
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Looking good Bruce! What rotors are they?
So just to clarify, to fit these you need;
1) Non Mo30 spindles
2) Adapters like the 9m version
3) Different rotors. Options being Cayenne, GT3, custom hats/rotors...??
That's it??
So just to clarify, to fit these you need;
1) Non Mo30 spindles
2) Adapters like the 9m version
3) Different rotors. Options being Cayenne, GT3, custom hats/rotors...??
That's it??
#85
Race Car
Thread Starter
Join Date: Sep 2005
Location: TEXAS
Posts: 4,247
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Those are 996 Twin turbo rotors. 23lbs. 7 oz. (not so extremely accurate scale)
$140 ea. from Pelican.. Shipped. Problem is.. These are not hubcentric to the 87+ yr 944 hubs like I thought they were. I have to make a ring just like the Cayenne's rotors need.
![Frown](https://rennlist.com/forums/images/smilies/frown.gif)
#90
Addict
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
[QUOTE=95ONE;9080005 Problem is.. These are not hubcentric to the 87+ yr 944 hubs like I thought they were. I have to make a ring just like the Cayenne's rotors need.
[/QUOTE]
Can you make me a set of rings ? I have the same 996tt rotors
![Frown](https://rennlist.com/forums/images/smilies/frown.gif)
Can you make me a set of rings ? I have the same 996tt rotors