porshh951s project thread. Z germans are coming!@!
#76
Rennlist Member
Where are you located? You still on a 2.5L engine? GT35 is pretty big for that no? Of course do-able but more for your E85/big boost/high rpm powerband type of trackcar setup I would guess.
#77
Addict
Rennlist Member
Rennlist
Small Business Partner
Rennlist Member
Rennlist
Small Business Partner
Stuck in Afghanistan...
Yep, still on the 2.5L completely stock longblock. Though I think I will be doing a camshaft from CEP (still waiting on a little more info from Dave).
A GT35R is a decent sized turbo (as you know) - though there are plenty of guys running a similar or larger on here (if they know it or not). I don't expect lag to be unreasonable for a 600whp capable turbo.
I don't really track the car, and is more of a street-encounter toy. I will be running pretty much all the GT35R turbo can give (assume my motor holds). I will update my build-thread during/after the swap. And will of course dyno it and have full datalogs (including knock).
Should be fun!
-Rogue
Yep, still on the 2.5L completely stock longblock. Though I think I will be doing a camshaft from CEP (still waiting on a little more info from Dave).
A GT35R is a decent sized turbo (as you know) - though there are plenty of guys running a similar or larger on here (if they know it or not). I don't expect lag to be unreasonable for a 600whp capable turbo.
I don't really track the car, and is more of a street-encounter toy. I will be running pretty much all the GT35R turbo can give (assume my motor holds). I will update my build-thread during/after the swap. And will of course dyno it and have full datalogs (including knock).
Should be fun!
-Rogue
#79
Monkeys Removed by Request
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
car runs good. Did about 60ish miles today on 10psi. Turning it up to 15psi tomorrow and going to hook up the datalogger. Got a few misc things to handle here before I leave and head back to dallas with the car.
Here are some pics I took of the engine bay today.
Here are some pics I took of the engine bay today.
#80
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
John, the engine is looking good. Gabe gave me a update late afternoon, you must be excited. You need to rotate the MAF where the element is on top, not at the bottom as you have it now
#81
Monkeys Removed by Request
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
will that effect the tune?
#83
Monkeys Removed by Request
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
#85
Race Car
John
it does look very nice. I am also looking forward to your vids as usual
Are you running with the WG w/o pipe. If so be careful as it is very easy to burn/crack a valve at high temps
it does look very nice. I am also looking forward to your vids as usual
Are you running with the WG w/o pipe. If so be careful as it is very easy to burn/crack a valve at high temps
#86
Monkeys Removed by Request
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
#88
Monkeys Removed by Request
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
#89
Monkeys Removed by Request
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
alright guys looks like we have a oil leak coming from the oil pump. Gotta take it apart and check it out. I won't be coming home with it today.
On the plus side I can get a few other little odds and ends I wanted done, now done.
looks like we are going to have to wait on those dyno numbers.
I know I know. I wanted them too. muahaha... soon. Car runs and drives great. The software john sells is top notch and the support has been nothing short of amazing.
since gabe is keeping the car a couple more weeks we are going to hookup the datalogger and start fine tuning the car. By the time it gets to me now its going to be perfect.
sigh, I need a cup o coffee.
On the plus side I can get a few other little odds and ends I wanted done, now done.
looks like we are going to have to wait on those dyno numbers.
I know I know. I wanted them too. muahaha... soon. Car runs and drives great. The software john sells is top notch and the support has been nothing short of amazing.
since gabe is keeping the car a couple more weeks we are going to hookup the datalogger and start fine tuning the car. By the time it gets to me now its going to be perfect.
sigh, I need a cup o coffee.
#90
Monkeys Removed by Request
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
oil leak turned out to be a sealent issue. Its fixed and car is running good.
just thought i'd update the thread. Car is now staying up there for a bit and wil get aformal breakin and tune ect.
i'll let you guys know when I fly in and we strap it to the dyno.
just thought i'd update the thread. Car is now staying up there for a bit and wil get aformal breakin and tune ect.
i'll let you guys know when I fly in and we strap it to the dyno.